Aviation Tools, Metal Working, Strap Duplicators | Matco Tools Online Tool Catalog

Page 1 | 2 | 3 | 4 | 5 Next >

Aviation Tools \ Metal Working \ Strap Duplicators

STRAP DUPLICATOR INVERTED TYPE

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths.
Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length
The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later.
The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom.

Part#: F2AV10-708 Price: $27.85

Qty.

STRAP DUPLICATOR PUNCH TYPE

Part#: F2AV10-711 Price: $33.75

Qty.

STRAP DUPLICATOR BUSHING TYPE

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths.
Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length
The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later.
The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom.

Part#: F2AV10-702 Price: $27.85

Qty.

STRAP DUPLICATOR-INV 4-PC KIT

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths.
Precise method for drilling duplicate holes in overlapping sheet - 6-1/4"" length
The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later.
The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom.

Part#: F2AV10-693 Price: $95.60

Qty.

Page 1 | 2 | 3 | 4 | 5 Next >

Call Toll Free: 866-BUY-TOOL (866-289-8665)