List: $24.05
(0) GM STEERING WHEEL PULLER LEGS
MST510A

Use in conjunction with the MST511A steering wheel puller to remove steering wheels on late model GM vehicles that are not pre-drilled to receive standard bolts. View Details

List: $154.95
(0) ADP/OWC ALTERNATOR OR PULLEY
ALT750

Complete set of tools used to remove ADP or OWC pulleys from alternators. These are difficult to remove and require a combination of bits to hold the inside of the pulley in place at the same time as holding the center spindle of the pulley. Precision machining insures that these bits will fit precisely into the tight specifications needed... View Details

List: $20.45
(0) 90-DEGREE POWER STEERING ADAPTER
MVA665

Allows the option of side-angle access to power steering adapters MVA661 and MVA662 when bleeding power steering systems. Swivels 360 degrees for optimum accessibility. View Details

List: $1.95
(0) HEX HEAD CAP SCREW, 3/8-16 X 4
4530A-4

SCREW 3/8"-16UNC*102L. View Details

List: $205.95
(0) STEERING WHEEL PULLER
MST7984

A complete (32) piece master steering wheel service set with all of the necessary tools to remove steering wheels on most of today's vehicles. Includes a forged puller flange with 5 sets of hardened hex head bolts for 2 or 3 way pulling configurations. Also includes a set of steering wheel puller legs for steering wheels without tapped holes... View Details

List: $77.95
(8) PULLEY REMOVER/INSTALLER SET
MST93A

Removes pressed-on alternator and power steering pulleys on most domestic vehicles. Includes complete instructions on set-up and a blow molded box for storage. View Details

List: $15.90
(0) 35MM AXLE NUT SOCKET
DTL49035A

SOCKET. View Details

List: $97.45
(0) POWER STEERING ADAPTER KIT
MVA670

Assists in the removal of trapped air from power steering systems. Each adapter is designed to fit snuggly in the neck of the power steering reservoir to form an air-tight seal when vacuum is applied. External vacuum source such as a MVP5000 hand vacuum pump is required... View Details

List: $6.95
(0) CHRYSLER PUMP PULLEY SPACER
4530A-5

IRON O RING 30*9.5L. View Details

List: $65.95
(0) POWER STEERING PUMP PULLEY SET
MST4530A

A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. Fits pulley hubs with diameters of 1-1/8", 1-1/4", 1-5/16" and 1-3/8". Includes the necessary adapters for servicing: GM 3.1L, 3100, 3400 and 3800 V6 engines. GM 2.3L Quad4 four-cylinder engines and Ford 4.6L, 5.4L and 5.8L modular V8 engines. View Details

List: $89.95
(0) STEERING SERVICE KIT
MST511B

Remove steering wheels on most domestic and imported cars with or without telescoping tilt steering columns. Use the puller legs with the steering wheel puller to remove steering wheel on late model GM vehicles. Steering wheel lock plate depressor also included. View Details

List: $136.95
(0) POWER STEERING PULLEY REMOVER KIT
PR5239A

2-sided flange to fit most domestic vehicles including early GM, Chrysler, and Ford. 2-in-1 tool services Saginaw, Thompson, and Ford C-2 power steering pumps with grooved hub assemblies with diameter of 1-1/8", 1-1/4", 1-5/16", and 1-3/8". Services GM belt-driven vacuum pumps, press-on water pump pulleys on GM 4- and 6-cyl. engines. View Details

List: $214.95
(1) FRONT END SERVICE SET
MST6295A

Comprehensive set for removal of most pitman arms, tie rod ends and ball joints found on automotive and light truck applications. Two pitman arm pullers for large or small ball joint applications. View Details

List: $29.95
(0) PUMP/ALTERNATOR PULLEY REMOVER
4530A-2

REMOVAL ASSEMBLED. View Details

List: $127.80
(1) INNER TIE ROD TOOL
TRT47

Uses 6 crow's feet to engage the wrench flats 1-3/16", 1-1/4", 1-5/16", 1-7/16", 33.6mm, and 1-1/2". 1-1/2" size works on Chevrolet Colorado and GMC Canyon applications. Works on tie rods with inaccessible flats to remove and install the inner tie rod without removing the rack... View Details

List: $107.95
(0) LARGE INNER TIE ROD TOOL
TRT5

Works on inner tie rods with inaccessible wrench flats on many trucks and SUVs. This tool comes with five crows feet sizes 1-7/16", 33.6mm, 38.4mm, 40mm crow foot for GM and 42mm to fit many Toyota, Nissan, Ford, Lincoln Mercury and Chevrolet truck and SUV applications. View Details

List: $12.95
(0) FORCING SCREW, 8 MM X 1.25 AND
4530A-3

BEARING ASSEMBLED. View Details

List: $124.95
(0) MASTER BOLT GRIP SET
MST6501A

Covers most bolt grip pulling applications including the 3300 / 3800 GM V6 engines. Typical applications: steering wheels, harmonic balancers, flywheels, crankshaft pulleys and gears with tapped holes. One heavy-duty forged, three way puller flange... View Details

List: $84.00
(0) 13 PIECE ALTERNATOR PULLEY KIT
ADP13

Used to service many popular late model vehicles with OWC and OAD alternator pulleys. Covers most US and import models as well as many European vehicles. Interchangeable bits for multiple applications. View Details

List: $28.80
(0) HUB BEARING REMOVER 14 MM
MST6963

This unique tool was designed to remove hub bearings that are rusted to the steering knuckle. No press required. Saves 1 hour+ on stubborn hub bearing removal... View Details