List: $42.25
(0) HARMONIC BALANCER PULLER
KD2286

Removes balancers, pulleys, gears with tapped holes. Bolt balancer with center screw on crankshaft end and tighten while tapping screw head to remove balancer. Includes 3/8"-24UNF, 5/16"-18UNC, 3/8"-16UNC and 10mm screws. View Details

List: $97.35
(0) LARGE CONICAL PITTMAN ARM PULL
PA150

View Details

List: $35.85
(0) 1/2" COLLET/PIN ASSEMBLY
4581A-4

M12*1.75*72.4L BEARING SPLITTER. M12*1.75*9/16"-12*117L DOUBLE THREAD FORCING SCREW. View Details

List: $73.50
(0) HARMONIC BALANCER INSTALLER
HB388

A must to properly install harmonic balancers or drive pulleys that are pressed on one or two groove pulleys on the crankshaft. Contains 12 adapters. View Details

List: $61.45
(0) 1-1/4" COLLET/PIN ASSEMBLY
4581A-1

1"-14*88.5L Bearing splitter. 1"-14*9/16"-12*134.5L double thread forcing screw. View Details

List: $35.85
(0) Slide Hammer Assembly
4581A-5

HOLLOW PIN. SHANK. ROLLING STRAIGHT THREADED PIN. View Details

List: $174.95
(0) HARMONIC BALANCER INSTALLER
HB760

Installs harmonic balancers or drive pulleys that are pressed on the crankshaft. Set includes a driving screw thrust bearing and threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers. Two long adapters for use on Dodge Hemi and Generation III GM motors... View Details

List: $115.95
(0) Lexus/Toyota Harmonic Damper Pulley Holding Tool
MST6430

Developed to aid in the removal and installation of the crank bolt on Lexus and Toyota engines. Factory specifications require up to 280 pounds of torque to seat the pulley properly. This tool allows the factory torque to be attained. This holding tool works with the following engines:... View Details

List: $33.75
(0) STEERING WHEEL LOCK PLATE TOOL
SWP7

Fits most domestic lock plates, including tilt, telescoping columns, small lock plates, and vehicles with air bags. Quickly depresses lock plate for easy removal of lock ring. Comes with a standard and metric adaptor... View Details

List: $117.95
(1) HUB, ROTOR AND AXLE PULLER
AP5818B

10 lbs. slide hammer . Fits puller adapted threaded 5/8" - 18". View Details

List: $195.95
(0) BLIND HOLE BEARING PULLER SET
MST4581A

For pulling jobs requiring an internal pull, i.e., pilot bearings. Set includes: 4 collets to fit a variety of applications: 3/8" - 1/2", 9/16" - 11/16", 5/8" - 1", 1" - 1-1/4"; 2-1/2 lbs. slide hammer and T-handle. View Details

List: $40.95
(0) 1" COLLET/PIN ASSEMBLY
4581A-2

3/4"-16*83.3L Bearing splitter. 3/4"-16*9/16"-12*130.2L double thread forcing screw. View Details

List: $35.95
(0) 19MM HARMONIC BALANCER SOCKET
HBS19

For Honda and Acura engines that use 19mm hex pulley damper bolt. Socket is designed with extra mass, directing the energy to break loose tight bolts. Can be used to install bolt. View Details

List: $54.95
(0) UPDATE KIT FOR MST9740D
MST13451

Update MST9740D (or any version of MST9740) to MST1345. Kit allows Dodge 5.7L 2009-2-15 and 3.5L 1995-2009 harmonic damper pulley to be pulled. Simple to remove clevis pins to change legs for updating... View Details

List: $19.55
(0) ADAPTER F/AP5818
11657

Adapter for AP5818 Heavy-Duty Slide Hammer Puller - pictured . View Details

List: $8.10
(0) EXT PUSH ROD F/MST9740B
974007

Ext. push rod for MST9740B - Harmonic Puller (pictured). View Details

List: $158.35
(1) CHRYSLER / GM HARMONIC PULLEY PULLER
MST9740D

Remove the harmonic damper pulleys found on many Chrysler and GM engines. Gives greater ease and control when installing the puller in confined areas with spring loaded legs. Eliminates the time consuming process of removing the radiator or other components. View Details

List: $89.95
(0) LONG REACH BALANCER PULLEY INSTALLATION KIT
LRHB700

Works on many late model Ford, GM and Dodge/Chrysler vehicles. Used in installation of underdrive or oversized pulleys for applications with recessed threads on the crankshaft. Covers applications other harmonic balancers will not cover where reach is an issue... View Details

List: $40.95
(0) 3/4" COLLET/PIN ASSEMBLY
4581A-3

9/16"-12*80.7L Bearing splitter. 9/16"-12*9/16"-12*128L Double thread forcing screw. View Details