List: $9.95
(0) AIRLINE DISCONNECT
ALD470

For use on 1/8" and 5/32" air lines with quick disconnect adapters. Sizes most often found on transmission air lines and auxiliary lines under dash. Newest size to ALD425 set. View Details

List: $220.95
(0) AUTOMATIC SLACK ADJUSTER PULLER
5056

Designed to service all S-cam air brake slack adjuster. Eliminates costly S-cam damage caused by "heat and beat" method. Works on Rockwell, Haldex, Gunite, and Bendix automatic adjusters. View Details

List: $68.00
(1) EXTRA LARGE OIL FILTER PLIERS
OF29900

Handles all auto and truck applications with range 2-1/4" to 7". Heavy-duty forged levers and cushioned grips. Spring loaded and can be easily adjusted... View Details

List: $35.65
(0) DURAMAX WATER IN FUEL SENSOR WRENCH
MST1310

Two tools in one. Used every time a fuel filter is replaced due to the plastic sensor that can easily be damaged by using pliers and other nonspecific designed tools. One end is designed to fit the odd shaped 40mm 12 sided sensor found on 2001 to 2010 trucks... View Details

List: $397.75
(0) HD DEUTSCH TERM CRIMPER
HDCRIMP

For use with larger diameter 6, 8 and 10 gage (Contact Sizes 4 & 8) closed barrel terminals. To use, install the appropriate Die Set, next insert the terminal and wire between the jaws, then squeeze the handles together to complete the crimp. Includes two Die Sets - one for 6 gage and the other for 8 & 10 gage wire... View Details

List: $42.25
(0) MAXX FORCE FUEL LINE RELEASE
MFFL548

For use on International Maxx Force series 11 and 13 engines. Properly sized to effectively depress each side of the fuel release tabs. View Details

List: $91.95
(1) INJECTOR HEIGHT GAUGE SET
3350

Set injectors during installation and at set service intervals on Detroit Series 50 and Series 60 engines. Set includes five sizes necessary for testing on multiple engines over multiple years. Includes 78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm gauge blocks along with knurled handle that allows for block to be used at 90 degree angle for use in areas with restricted access. View Details

List: $137.95
(0) DURAMAX LB7 INJECTOR PULLER KIT
IPK1170

Removes diesel injectors from GM vehicles produced from 2001 to 2004 with an LB7 Duramax engine. Pulls the injector straight out the full length of the nozzle tip without rocking, which reduces the possibility of unwanted sleeve removal, saving up to 1/2 hour. Removes sleeve from injector without damage. View Details

List: $49.95
(0) DEUTSCH TERMINAL CRIMPER
DTC141618

Crimps Deutsch 14, 16 and 18 gauge closed barrel terminals found on motorcycles, trucks, construction equipment, race cars, agricultural equipment, heavy-duty vehicles and equipment subject to excessive vibration. Easy to use - Just insert the terminal and wire, then squeeze the handles tightly together to complete the crimp. Ratcheting action provides a perfect crimp... View Details

List: $164.45
(0) 6 PIECE DEUTSCH TERMINAL SERVICE KIT
DTSK6

Kit crimps and releases Deutsch terminals. Crimps both open barrel terminals and closed barrel terminals. Release tools have stainless steel shafts and knurled aluminum handles... View Details

List: $25.55
(5) TRUCK CAGE BOLT SOCKET
TC490

Extra-deep 3/4" socket tightens the cage bolt nut to unlock air brakes on trucks. Quickly unlocks seized truck air brakes. Also removes the air brake booster for replacement... View Details

List: $11.10
(0) WATER SENSOR WRENCH FOR DURAMAX
WSW12

Removes and installs the water sensor on 2001 and newer 6.6L GM Duramax Diesel engines. Use when replacing the fuel filter or when servicing the water sensor. Plastic sensor has a 12 sided design that is easily damaged by tools, like pliers, that do not specifically fit the sensor. View Details

List: $46.75
(3) AIRLINE DISCONNECT SET OF 5
ALD425

Disconnects Quick Connect Push-in connectors found on Heavy-Duty truck air systems. Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment. Addition of a fifth size. Now works on 5/8", 1/2", 3/8", 1/4", 5/32" and 1/8" lines. View Details

List: $49.70
(0) DEUTSCH TERMINAL CRIMPER 20-22
DTC2022

Crimps closed barrel terminals found on motorcycles, trucks, construction equipment, race cars, agricultural equipment, heavy-duty vehicles and other vehicles and equipment subject to excessive vibration. Easy to use - Just insert terminal and wire, then squeeze handles tightly together to complete the crimp. Ratcheting action provides a perfect crimp... View Details