List: $102.95
(0) FAN CLUTCH WRENCH SET
MST6120

Two piece kit gives the professional technician the ability to service all fan clutches that have bolt on pulleys on the water pump. Works with Chrysler, GM, Ford, Land Rover and Mazda (Not including the 4.9 liter 6 cylinder Ford). View Details

List: $11.05
(0) GM UNIVERSAL COOLANT HOSE REMOVAL
241

Works to easily depress release clips found in cooling system disconnects. Angled to help in access and leverage. View Details

List: $209.95
(4) PNEUMATIC FAN CLUTCH SET
PFC440

Quickly remove and install the fan clutch when repairing the water pump or fan clutch. Does the job much faster than conventional fan clutch wrenches. Set includes 7 driving wrenches that fit Ford, GM and Chrysler; 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2" in a plastic storage case. View Details

List: $248.45
(1) AIR POWERED COOLING SYSTEM PRESSURE TESTER
APC102

Uses shop air (no manual labor) to generate pressure in a cooling system. Adjustable pressure regulator is used to match vehicle cooling system pressure rating. 3 of the most commonly required cooling system adapters. View Details

List: $11.05
(0) LARGE UNIVERSAL COOLANT HOSE REMOVAL
242

Works to depress release clips on disconnect for easy hose removal. Angled for added leverage and clearance. View Details

List: $29.95
(0) THERMOSTAT GASKET CLEANER
TCG225

Makes cleaning hard-to-reach gasket surfaces an easy job. Uses a floating guide shaft so the user can easily steer the abrasive pad around the gasket surface. Use with a die grinder to quickly clean thermostat gaskets on Dodge trucks; also works to clean oil pans, water pumps and other inaccessible applications. View Details

List: $28.95
(1) 15" RADIATOR HOSE TOOL - ORANGE
RTOXLB

Removes radiator hose from clamps and fittings. Pulls cotter pins. Ergonomic handle... View Details

List: $38.20
(0) LARGE HOSE CLAMP VISE
HCV16

Vise design fits in tight spots; tool is 3-5/8" long and opens to 2-1/8". Vise is often left in place, with the clamp compressed, during service. Ramp on jaws guides tab of clamp into correct position and traps it in the slot for safety... View Details

List: $42.95
(1) SPILL FREE FUNNEL WITH LID
SFF2L

Controls the proper amount of coolant entering the system and enables unattended filling of the coolant system. Eliminates trapped air pockets which usually cause erratic cooling system and heater performance. Five adapters fit most domestic and import cars and light trucks and includes threaded cap and adapter for newer GM threaded style radiator openings... View Details

List: $40.65
(0) UNIVERSAL COOLANT HOSE REMOVAL SET
USC4

Makes removal of coolant system hose a breeze. Designed to completely fill the void in the connector to release the fastener. Works on hoses 5/8" to 1"... View Details

List: $229.95
(0) COOLING SYSTEM FILLER FOR USE WITHOUT ADAPTERS
MCR103U

Eliminates airlocks during cooling system refilling. Compact design - no need to change hoses during refilling process. Complete refilling process can be done in 2-3 minutes... View Details

List: $39.75
(0) NORTHSTAR WATER PUMP SOCKET
NSWP80

Used to remove and install the water pump on Cadillac Northstar 4.6 liter V-8 engines 1993 and later, Oldsmobile Aurora 4.0 liter V-8 engines 1997 and later. Enhanced durability. More strength and control in removing and replacing water pump impeller. View Details

List: $24.95
(5) 9" RADIATOR HOSE TOOL - ORANGE
RTO1MB

Removes radiator hose from clamps and fittings. Pulls cotter pins. Ergonomic handle. View Details

List: $11.05
(0) FORD UNIVERSAL COOLANT HOSE REMOVAL
240

Works to easily depress release clips for simple hose removal. Tool is angled and offset to allow extra leverage for tough disconnects. View Details

List: $20.95
(0) ANTI-FREEZE HYDROMETER
SCC3

Determines in degree's the freeze protection strength of glycol-water solutions. Range of 10° F to -60° F. Temperature compensating. View Details

List: $229.95
(0) COOLING SYSTEM FILLER FOR USE WITH ADAPTERS
MCR103A

Eliminates airlocks during cooling system refilling. Compact design - no need to change hoses during refilling process. Complete refilling process can be done in 2-3 minutes... View Details

List: $26.95
(0) FUEL AND AC DISCONNECT PLIERS
DP373

Designed to connect or disconnect quick connect coupling air conditioning and fuel lines on GM, Dodge - Chrysler, Ford and other vehicles with spring loaded connectors or four clip retention. Ford has spring loaded connectors while others use a four clip method of retention. Different sized fork openings for use with single or two step collar designed connector lines... View Details

List: $24.95
(4) 9" RADIATOR HOSE TOOL - GREEN
RTG1MB

Removes radiator hose from clamps and fittings. Pulls cotter pins. Ergonomic handle. View Details

List: $37.00
(1) SMALL HOSE CLAMP VISE
HCV15

Vise is often left in place, with the clamp compressed, during service. Ramp on jaws guides tab of clamp into correct position and traps it in the slot for safety. Tighten knurled knob by hand or use 1/4" drive ratchet... View Details

List: $11.05
(0) EXTRA LARGE UNIVERSAL COOLANT HOSE REMOVAL
243

Works to easily depress release clips for easy hose removal. Angled for extra leverage and clearance. View Details