List: $69.95
(0) BMW, AUDI & VW 32MM FAN CLUTCH WRENCH
MST6210

32mm wrench is 17", to reach down to the fan clutch hex coupler. Works on all BMW models while the MST6160 universal holding tool works on all except BMW 4.0L & 4.4 L V-8 engines. For 3, 5, 7, 8, X & Z Series BMW applications, Audi 1996 & later (except pressed on pulleys) VW 1998 & later (except pressed on pulleys). View Details

List: $64.65
(0) FAN CLUTCH SPANNER WRENCH
FCW441

Use with a 36mm fan clutch wrench on GM, Chrysler, and Jeep truck, Van and SUV application from '99 and on for GM, and '98 and on for Chrysler and Jeep. Double-sided tool with two pin configurations, two prongs on one side and three on the other to hold pressed pulleys with holes in place while loosening the fan clutch with a fan clutch wrench. For GM '99 and newer 4.8L, 5.3L and 6.0L; Chrysler '98 and newer 3.9L, 4.7L, 5.2L, 5.9L 8.0L Chrysler factory replacement water pumps '93 and newer 3.9L, 5.2L, 5.9L and '97 and newer 8.0L. View Details

List: $25.95
(1) SHAFT TYPE SEAL PULLER
SSP584

Brace the push rod against the head and push the handle to remove the seal. Engage the adjustable hook behind the seal. Removes camshaft and crankshaft seals without damage to the shaft. View Details

List: $19.95
(0) SINGLE CAM CLAMP (1)
CC4

Single CamClamps lock timing gears individually. Compact size allows use in confined engine compartments. Universal design works on single, dual, and quad cam engines... View Details

List: $32.45
(0) SUREGRIP SERPENTINE BELT TOOL
SSB4

Jaws actuate to allow user to grab hold of the belt. Long reach for use in tight spaces. Belt will not slip from the jaws allowing easier installation of difficult serpentine belts. View Details

List: $16.90
(0) STRETCH BELT INSTALLER
SB736

Quickly and easily installs Stretch belts. Will not damage stretch belts during installation. Stretch belts are being used more often as a means of reducing costs. Eliminates the belt tensioner... View Details

List: $183.95
(0) BALANCER PULLER KIT
MST6668

This balance puller kit combo allows for pulling from tapped holes in the balancer, or from the outside diameter. Special screws protect from installing bolts too deep and damaging sensors. Can be used without removing the radiator from the vehicle in most applications... View Details

List: $58.00
(1) STRETCH FIT BELT TOOL KIT
SBT709

Universal installation and removal of all stretch fit belts. Easily installs all stretch fit belts. Allows removal and reuse of stretch fit belts... View Details

List: $92.95
(0) GM/CHRYSLER PULLEY HOLDER
MST9980A

This specially designed tool is used on vehicles using pressed on pulleys. Redesigned with billet chromoly bulkhead pins. The MST9980A is used on the following applications... View Details

List: $26.95
(0) STRETCH BELT INSTALLER/REMOVER
SBT593

Combination installation / removal tool for most stretch belt applications. Unique magnetic face holds the tool on the pulley. View Details

List: $53.35
(0) TOYOTA SERPENTINE BELT WRENCH TOOL
TOY1914

Equipped with 14mm and 19mm, 12 point securing attachments. Two sided tool for maximum number of applications. Applications: 1998-2005 Corolla, 2004 Matrix, 2008 Highlander V6 (Non Hybrid), 2002 RAV4 and 4.7L/5.7L V8 used in Tundra and Sequoia through 2008. View Details

List: $91.95
(0) BMW T-60 TORX SERPENTINE TOOL
MST1250

Saves time by reducing the number of parts removed to change belts. Double ended to fit more models. Extra-long for more leverage... View Details

List: $141.95
(0) DODGE DAMPER PULLEY PULLER
MST1345

Designed for DODGE 5.7 2009 to current and 3.5 1995-2009. Slender design to fit the small windows in the pulley. Geometry that increase's the bite of the leg to pulley as its tightened. View Details

List: $24.80
(1) BELT INSTALLATION ASSIST
MST9417A

Time saving tool gives the technician the control and reach when installing serpentine belts, V-belts and timing belts. In confined areas this tool can access pulleys and sprockets that are not to accessible to the technician. The three pin design gives the technician convenient belt push/pull capability and the handle give the twisting control for belt installation in difficult areas. View Details

List: $27.95
(0) 36MM FAN CLUTCH WRENCH
43390

36mm for Use with PFC440. Faster and easier than conventional fan clutch wrench. No holding wrench necessary. View Details

List: $15.75
(0) BELT HOOK TOOL
MST110B

This handy tool assists in the removal and installation of V-Belts, serpentine and timing belts where space is a problem. It's perfect for reaching into confined areas where the belt has to be pulled, pushed or twisted. View Details

List: $79.95
(0) DURAMAX FAN HOLDER
MST14300

Used on 2011 to current Duramax LGH and LML engines. 20 inch length provides leverage and easy handling. Holds pulley at 4 points to reduce damage... View Details

List: $30.05
(0) EUROPEAN STRETCH BELT INSTALLER
SB735

Use to install stretch fit belts on many European vehicles. Prevents damage to stretch belts during the installation process. View Details

List: $77.95
(0) HONDA SERPENTINE BELT TENSION TOOL
MST1095

6 point 19mm won't strip the aluminum hex on the belt tensioner. The 14mm for extreme tight spaces like on 2003 & later Element. Fits 2006 & later Civics... View Details

List: $128.95
(0) TIMING GEAR HOLDER KIT
TGH100

Securely holds the timing gear during removal or installation. Prevents timing gear movement while the retaining bolt is removed. Allows rotation of cam gear to align valve timing marks... View Details