List: $80.25
(0) FUEL INJECTION TESTER
FIT13A

This basic fuel injection tester includes large and small Schrader adapters, M6-1.00 O-ring adapter, and tee manifold. Includes everything necessary to test the following systems: American Motors; Bosch AFC, MPC European and Japanese (except CIS- use our FIT447); Chrysler Corporation; Ford Motor Company; GM (except TBI- use our FIT446); Japanese fuel injection systems; and other systems using Bendix-type fuel injection or a Schrader-type valve, including the small Schrader valve found on TBI and multi-port fuel injection systems on Ford products. The 2-1/2" gauge has a dual scale dial with ranges from 0-100psi and 0-7 bar... View Details

List: $301.25
(0) BASIC FUEL INJECTION PRESSURE TESTER
FIT448

This set includes everything to test the following: Bosch AFC, MPC, Digijet/Digifant- (except CIS- use our FIT447) Chrysler Corporation Ford Motor Company General Motors (except TBI- use our FIT446) Japanese Fuel Injection Systems Others using Bendix-type fuel injection or Schrader-type valve, including the small Schrader valve found on Ford products. The 2-1/2" gauge has a dual scale dial with ranges from 0-100psi and 0-7 bar. Quick Coupler connection at the end of the gauge hose makes a speedy and efficient coupling possible with the adapters... View Details

List: $366.25
(3) FUEL INJECTOR CANISTER CLEANER
FIT470B

Cleans carbon from intake valves, fuel passages, and cylinders with a professional carbon cleaning solution. Will restore the original spray pattern more effectively, giving improved performance, fuel economy, and emission tests. Uses shop air with any professional canister cleaning solution on the market... View Details

List: $81.95
(0) FORD 6.0L INJECTOR PRESSURE REGULATOR SOCKET
MST6765

This socket actually combines two OE tools into one. The configuration for the IPR changed in 2005 and a second tool was developed for the change so we worked with specialized technicians to develop one tool that can address either version of the IPR - giving you a single tool for both applications. Convenient 3/8" square drive for use with multiple drive tools... View Details

List: $34.45
(0) IPR SOCKET
IPR68

Used to remove and replace the Injector Pressure Regulator (IPR) on Ford 6.0L and other diesel engines. Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused. This is located in a very tight location... View Details

List: $45.65
(0) TERMINAL RELEASE TOOL FORD 6.0
MST6766

Over 7" long with a comfortable grip. Used on Ford 6.0 Liter Engines. Allows for the removal the vehicle's injector wiring harness while preventing any potential damage to the harness itself. View Details

List: $19.25
(0) 3/8" DR X 7/8" X 90MM OXY SKT
SS7K2

Designed to remove and install vacuum swithces with a 7/8" hex and some oxygen sensors. For use with a Matco 3/8" Ratchet or 1" Wrench. View Details

List: $17.80
(0) LONG-REACH VACUUM SWITCH SOCKE
DSS3K03

40CR steel. HRC40-45. 6 POINT. View Details

List: $22.50
(0) VACUUM SWITCH SOCKET
SS7KA2

Vacuum Switch Socket 3/8" Drive x 7/8" (22mm) x 90mm. View Details

List: $22.50
(0) HEATED OXYGEN SENSOR SOCKET
SS7KA6

Heated Oxygen Sensor Socket 1/2" Drive x 7/8" (22mm) x 50mm. View Details

List: $468.00
(6) MASTER FUEL PRESSURE TEST KIT
FIT550

Performs running, residual, rail and flow rate pressure tests. Large, easy to read, 3-1/2" dual-scale gauge reads 0-100psi and 0-700 kPa. Kit includes: 50+ adapters, fittings, 48" hose, pressure relief and fuel discharge hose to test most domestic and foreign fuel injection systems... View Details

List: $538.25
(1) MASTER FUEL PRESSURE TEST SET
FPT5000

Quickly and easily diagnose fuel-related issues on most major gasoline engine platforms, including domestic and foreign vehicles . In-line adapter configuration allows for easier connection to the fuel system as well as the ability to isolate the supply and return lines independently without disconnecting the adapters from the engine. 3-1/2" gauge and hose configuration allows adapters to connect directly to the gauge and bleed-off or connect to the 4 ft. extension hose for applications where additional reach is necessary... View Details

List: $52.95
(0) 3 PIECE DIESEL OXYGEN SENSOR SET
DSS3K

DSS3K01 - 28mm x 1/2" drive injector socket used to remove diesel oxygen sensors. DSS3K02: 7/8" x 1/2" drive injector socket used to remove diesel oxygen sensors. DSS3K03: 7/8" x 1/2" drive for long-reach vacuum switch . View Details

List: $137.65
(0) VW/AUDI DIESEL INJECTOR PULLER
MST1220

Removes diesel injectors from 1996 to current VW and Audi . With the 1 pound slide hammer, these injectors are removed easily without damage. Kit includes:... View Details

List: $24.50
(0) OIL PRESSURE SENDING UNIT SOCK
SS7KA1

Allows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2" drive tool. View Details

List: $22.50
(0) LOW PROFILE OFFSET OXYGEN SENS
SS7KA7

Low Profile Offset Oxygen Sensor Socket 3/8" Drive x 7/8" (22mm) x 30mm. View Details

List: $14.80
(0) 3/8 DR X1-1/16" X 74MM OIL SKT
SS7K5

Includes a 1" and 1-1/16" hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8". Designed to be used with a 3/8'"drive tool or 1-1/8" wrench. View Details

List: $35.70
(1) 3 PIECE OXYGEN SENSOR SOCKET SET
SS3K

Vacuum Switch Socket 3/8" drive x 7/8" x 80mm. Designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with 3/8" drive tool or 1" wrench. Heated Oxygen Sensor Socket 3/8" drive 7/8" x 50mm. Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2" for easy access. Offset Oxygen Sensor Wrench 3/8" drive x 7/8" x 30mm Low profile design for use in tight spaces. Designed to be used with 3/8" drive tool... View Details

List: $215.25
(0) BASIC FUEL PRESSURE TEST SET
FPT1000

Quickly and easily diagnose fuel-related issues on gasoline vehicles equipped with standard or small Schrader test ports as well as other popular applications. 3-1/2" gauge and hose configuration allows adapters to connect directly to the gauge and bleed-off or connect to the 4 ft. extension hose for applications where additional reach is necessary. Gauge features a dual-scale dial with ranges from 0-100psi and 0-7bar with rugged boot and hook for hands-free reading and durability... View Details

List: $22.50
(0) INJECTOR SOCKET
SS7KA3

Injector Socket 1/2" Drive x 1-1/16" (27mm) x 80mm. View Details