List: $47.10
(0) STRAP DUPLICATOR PUNCH TYPE
F2AV10-711

View Details

List: $47.10
(0) STRAP DUPLICATOR BUSHING TYPE
F2AV10-701

View Details

List: $133.35
(0) STRAP DUPLICATOR KIT
F2AV10-687

The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom. Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths... View Details

List: $38.75
(0) STRAP DUPLICATOR BUSHING TYPE
F2AV10-700

Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths... View Details

List: $50.00
(0) STRAP DUPLICATOR PUNCH TYPE
F2AV10-710

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later... View Details

List: $164.20
(0) STRAP DUPLICATOR PUNCH KIT
F2AV10-699

Precise method for drilling duplicate holes in overlapping sheet - 6-1/4"" length. Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom... View Details

List: $38.75
(0) STRAP DUPLICATOR INVERTED TYPE
F2AV10-705

Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom... View Details

List: $38.75
(0) STRAP DUPLICATOR INVERTED TYPE
F2AV10-709

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later... View Details

List: $133.35
(0) STRAP DUPLICATOR-INV 4-PC KIT
F2AV10-693

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths. Precise method for drilling duplicate holes in overlapping sheet - 6-1/4"" length. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later... View Details

List: $38.75
(0) STRAP DUPLICATOR BUSHING TYPE
F2AV10-704

The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length... View Details

List: $38.75
(0) STRAP DUPLICATOR INVERTED TYPE
F2AV10-708

The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom. Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths... View Details

List: $38.75
(0) STRAP DUPLICATOR BUSHING TYPE
F2AV10-703

The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom... View Details

List: $38.75
(0) STRAP DUPLICATOR INVERTED TYPE
F2AV10-707

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later... View Details

List: $35.00
(0) STRAP DUPLICATOR INVERTED TYPE
F2AV10-706

View Details

List: $38.75
(0) STRAP DUPLICATOR BUSHING TYPE
F2AV10-702

Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom... View Details

List: $50.00
(0) STRAP DUPLICATOR PUNCH TYPE
F2AV10-713

Strap duplicators are ideal tools for quickly locating the proper alignment of rivet holes for panel replacement. Three styles are available in either 6 1/4"" or 13 1/4"" lengths. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later... View Details

List: $50.00
(0) STRAP DUPLICATOR PUNCH TYPE
F2AV10-712

Precise method for locating and drilling duplicate holes in overlapping sheet - 13-1/4"" length. The Punch type locates the hole in the same manner as the Bushing type; however, instead of drilling through the bushings, you lightly tap this one with a hammer to center punch the new panel and drill it later. The Bushing Style duplicator is used by sliding the end with the pin between the sheets and locating the hole to be duplicated from inside. The Inverted type staggers both sheets (top and bottom) and locates the hole to be duplicated from the bottom... View Details