List: $139.95
(0) CUMMINS ISX GEAR PULLER
CM369

Used to pull the injector and valve cam gears on Cummins engines (2007-2017) . Comparable to Cummins #3163069. View Details

List: $429.95
(0) CUMMINS ISX 4 WEDGE TIMING SET
CM3021

Comparable to factory Cummins #3163021. Set includes 4°, 6° (x2) and 7° wedges and crank pin. Extra 6° wedge is included for (2007-2012) engines with two camshafts... View Details

List: $99.95
(0) 27MM FUEL RAIL PRESSURE SENSOR WRENCH FOR DURAMAX ENGINES
MST1215

Removes fuel rail pressure sensor on 2006 to 2010 Duramax LBZ and LMM diesel engines. Saves more than 1 hour depending on engine/vehicle model. Reduces the amount of components that need to be removed to service the sensor... View Details

List: $20.60
(0) GLOW PLUG PULLER
GPP70

For removing and installing the wire harness on the glow plug connectors in the 6.0 Ford diesel engine. Made of stainless steel for rigidity and durability with a thumb tab and textured high visibility grip to get a better grip on the tool when removing the harness. Sometimes the harness is fragile and can break easy, and with a better grip, the tech will have more control when removing the harness, lessening the chance of breakage... View Details

List: $36.25
(1) FUEL FILTER WRENCH - FORD TRANSIT
FFWFT

Wrench is used to remove and install fuel filter elements on 3.2L diesel Ford transit engines. Works on 2015 to current 150, 250 and 350 models. Notched to match the canister design to help eliminate slipping and damage to the canister... View Details

List: $85.05
(0) DURAMAX FAN HOLDER
MST14300

Used on 2011 to current Duramax LGH and LML engines. 20" length provides leverage and easy handling. Holds pulley at 4 points to reduce damage. View Details

List: $74.50
(2) CUMMINS ENGINE ROTATING TOOL
MST9565A

3/8" drive barring tool is used when making valve adjustments on pump settings made with a two piece sleeve. Two piece sleeve allows proper contact with the flywheel when the flywheel is at different depths from the hole where the tool is inserted. Most of the popular Dodge diesel pickup trucks require the use of this tool. View Details

List: $57.90
(0) 3 PIECE DIESEL OXYGEN SENSOR SET
DSS3K

1/2" drive. View Details

List: $53.35
(0) 3/8" FUEL LINE DISCONNECT FOR VOSS
FLD1325

Two piece design allows easy access to small Voss style connectors. Straight and 90° versions for use on various connector angles. Made from precision laser cut steel for long life. View Details

List: $61.90
(1) DURAMAX FLYWHEEL HOLDER AND SOCKET
DFH221

Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions. Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Use 36mm 12-point socket with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. View Details

List: $151.00
(0) VW/AUDI DIESEL INJECTOR PULLER
MST1220

Removes diesel injectors from 1996 to current VW and Audi. With the 1 lbs. slide hammer, these injectors are removed easily without damage. Kit includes:... View Details

List: $85.05
(0) DIESEL DEF TUBE RELEASE FORKS
DRF152

Allows easy access to hard to reach DEF line connectors. Two sided design allows for straight and 90° access. Three different sizes... View Details

List: $12.55
(0) WATER SENSOR WRENCH FOR DURAMAX 2001-2011
WSW10

Removes and installs aftermarket water sensor on 2001 - 2011 6.6L Duramax diesel engines. Use when replacing the fuel filter or servicing the water sensor. Aftermarket plastic sensor has a modified octagon shape that could be damaged by tools, like pliers, that do not specifically fit the sensor. View Details

List: $151.00
(0) DURAMAX LB7 INJECTOR PULLER KIT
IPK1170

Removes diesel injectors from GM vehicles produced from 2001 to 2004 with an LB7 Duramax engine. Pulls the injector straight out the full length of the nozzle tip without rocking, which reduces the possibility of unwanted sleeve removal, saving up to 1/2 hour. Removes sleeve from injector without damage. View Details

List: $52.85
(0) GM DURAMAX DIESEL SERVICE SET
MST6920

Works on all GM Duramax diesel trucks 2001 - present 6.6L. 36mm, 12 point, 3/4" drive impact socket removes the crank bolt which requires a torque of 285 ft. lbs. 14mm, 1/2" drive stubby impact Allen socket aids the technician in removal and installation of the flywheel... View Details

List: $64.95
(1) CUMMINS COMPRESSOR WRENCH
WCS2022

12 point box wrench on both ends. 5/8" on one end; 11/16" on the other. Accommodates air compressor and fuel flange bolts on NH series in-line 6 cylinder engines. View Details

List: $38.25
(1) GM DURAMAX FLYWHEEL LOCK
MST6925

Designed to hold the flywheel stationary when removing or replacing the crankshaft bolt. Saves time by not removing the starter motor. Holds the engine in place for high torque requirements... View Details

List: $39.25
(0) 8" DAVCO DIESEL FILTER WRENCH
DFW8

Designed to be used on a Davco aftermarket fuel filter system. Designed to loosen the filter vent cap on top and the main filter collar. Half-moon design provides easier access to the fuel filter and is made of high strength steel that prevents wrench from opening when loosening collar... View Details

List: $72.00
(0) HEAVY-DUTY OIL FILTER WRENCH
MST4440

Unique self gripping design for true universal fit on all filters from 3" to 4-3/4". Heavy-duty construction provides the torque needed to loosen the toughest filters. Operate with either 1/2" square drive or 21mm hex. View Details

List: $148.00
(0) DURAMAX FLYWHEEL HOLDER
OTC7221

Fits GM 6.6L Duramax diesel 2001 to present. Holds flywheel in a locked position for servicing. View Details