INDUCTOR LITE KIT | Matco Tools List: $2,699.95
(0) INDUCTOR LITE KIT
LITE2000

Utilizes Invisible Heat® to easily remove parts bonded to metal, including adhesives, logos, side moldings, direct glazed windows, stone guard protection, sealers, mechanical parts and dent. In seconds, you will be able to release seized hardware from corrosion or thread lock compounds and other adhesives without the collateral damage and safety risks of an open flame. Reduce labor by as much as 75%... View Details

MINI-DUCTOR II | Matco Tools List: $499.95
(0) MINI-DUCTOR II
MINIDUC2

Releases metal from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster. Release compounded nuts, frozen manifold bolts, bearings and more. Prevents damage to nearby plastics, rubber, wiring and fuel lines eliminating unnecessary repair and install... View Details

7/8" PRE-FORMED COIL | Matco Tools List: $18.30
(0) 7/8" PRE-FORMED COIL
MD99-601

Works best with 1/2" fasteners and smaller. Coil will last for several hundred uses or more, subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

1-1/4" LONG PRE-FORMED COIL | Matco Tools List: $24.95
(0) 1-1/4" LONG PRE-FORMED COIL
MD99-623

Has extra-long leads for applications that are around corners or buried deep near plastic or rubber; simply bend to your desired configuration. Works best with 1" fasteners and smaller. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

3/4" PRE-FORMED COIL | Matco Tools List: $18.30
(0) 3/4" PRE-FORMED COIL
MD99-611

Works best with 1/2" fasteners and smaller. Will last for several hundred uses or more, subject to use . Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

MINI-DUCTOR 12V | Matco Tools List: $699.95
(0) MINI-DUCTOR 12V
MINIDUC12V

Ideal for roadside repair or at a customer's premises where regular power supplies aren't available. Completely portable. Works off a 12V battery pack, off a car, van or truck battery ... View Details

41" BEARING BUDDY COIL | Matco Tools List: $35.65
(0) 41" BEARING BUDDY COIL
MD99-603

Flexible magnetic Litz wire for wrapping around in-line and asymmetrical objects that are not accessible with the standard coils . Offers greater flexibility and versatility for heating and removing bearings, gears, pulleys, O2 sensors, tie rod ends and in-line applications. Will last for approximately one hundred uses or more, subject to use; avoiding abrasion and overheating ... View Details

MINI-DUCTOR VENOM | Matco Tools List: $599.95
(0) MINI-DUCTOR VENOM
MINIDUCV

Releases metal from corrosion and thread lock compounds without the dangers of open flame. Release seatbelt bolts, O2 sensors, fuel tank straps, brakes, suspension and more. Salvage parts normally discarded... View Details

1" LONG PRE-FORMED COIL | Matco Tools List: $25.45
(0) 1" LONG PRE-FORMED COIL
MD99-622

Works best with 3/4" fasteners and smaller. Will last for several hundred uses or more subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

1" PRE-FORMED COIL | Matco Tools List: $20.95
(0) 1" PRE-FORMED COIL
MD99-610

Works best with 3/4" fasteners and smaller. Will last for several hundred uses or more, subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

7/8" LONG PRE-FORMED COIL | Matco Tools List: $19.35
(0) 7/8" LONG PRE-FORMED COIL
MD99-605

Works best with 1/2" fasteners and smaller . Will last for several hundred uses or more subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

MINI-DUCTOR COIL KIT | Matco Tools List: $149.95
(0) MINI-DUCTOR COIL KIT
MINIDUCKIT

Includes 8 interchangeable coils that enable you to heat fasteners up to 1-1/2" in diameter and are a variety of lengths and sizes. Each coil will last for several hundred uses or more, subject to proper use (avoid abrasion and overheating). Coil insulation is coated to resist abrasion; however, if insulation is breached, a new coil will need to be used... View Details

LONG COIL KIT | Matco Tools List: $188.65
(0) LONG COIL KIT
MD99-675

Includes 8 interchangeable longer coils for larger parts and hard-to-reach areas. Heat fasteners up to 1.5" in diameter and the long coils offer extra reach up to 13.25". Each coil will last for several hundred uses or more subject to proper use (avoid abrasion and overheating)... View Details

1-1/4" PRE-FORMED COIL | Matco Tools List: $22.40
(0) 1-1/4" PRE-FORMED COIL
MD99-609

Works best with 1" fasteners and smaller. Will last for several hundred uses or more, subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

1-3/4" PRE-FORMED COIL | Matco Tools List: $22.95
(0) 1-3/4" PRE-FORMED COIL
MD99-607

Larger diameter coil and works best with 1-1/2" fasteners and smaller. Will last for several hundred uses or more subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details

MINI-PAD | Matco Tools List: $81.55
(0) MINI-PAD
MD99-604

Mini-Pad is a smaller version of Fast-Off Pad, allowing removal of decals, graphics, emblems and body side moldings with our Mini-Ductor Series. Remove stripes, graphics and smaller objects from ferrous metals. Stress relieve dents to ease repair... View Details

THIN WALL COIL | Matco Tools List: $18.30
(0) THIN WALL COIL
MD99-632

Allows you to remove recessed lug nuts easier by getting in the tight space between the nut and the wheel. Works best in tight spaces. Coil will last for several hundred uses or more subject to use... View Details

7/8" LONG PRE-FORMED COIL | Matco Tools List: $20.95
(0) 7/8" LONG PRE-FORMED COIL
MD99-621

Works best with 1/2" fasteners and smaller. Coil will last for several hundred uses or more subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil ... View Details

MINI-DUCTOR VENOM KIT | Matco Tools List: $749.95
(0) MINI-DUCTOR VENOM KIT
MINIDUCVKIT

Includes three basic work coils (MD99-601, MD99-602, MD99-603) as well as the Standard Coil Kit (MD99-650). Release seatbelt bolts, O2 sensors, fuel tank straps, brakes, suspension and more. Salvage parts normally discarded... View Details

1-1/2" PRE-FORMED COIL | Matco Tools List: $21.95
(0) 1-1/2" PRE-FORMED COIL
MD99-608

Works the best with 1-1/4" fasteners and smaller. Will last for several hundred uses or more, subject to use. Use of the proper size coil, avoiding abrasion and overheating, prevents premature wear to the coil... View Details