List: $26.65
(0) SWIVEL GRIP OIL FILTER WRENCH FOR CATERPILLAR ENGINES
OF70

Tough, stainless steel band with permanently bonded textured coating for superior gripping power that won't slip. Works on Caterpillar engines and has a range of 5-1/4" to 5-3/4". "Swivel Grip" handle makes it easy to turn in tight spots... View Details

List: $38.25
(1) GM DURAMAX FLYWHEEL LOCK
MST6925

Designed to hold the flywheel stationary when removing or replacing the crankshaft bolt. Saves time by not removing the starter motor. Holds the engine in place for high torque requirements... View Details

List: $148.00
(0) DURAMAX FLYWHEEL HOLDER
OTC7221

Fits GM 6.6L Duramax diesel 2001 to present. Holds flywheel in a locked position for servicing. View Details

List: $190.30
(0) FORD 6.0L SUPPLY TUBE REMOVER
OTC7481

Removes high pressure fuel supply tube. Fits Ford 6.0L diesel engines 2003-2010. View Details

List: $20.10
(0) INJECTOR SOCKET 28MM X 1/2” DRIVE
DSS3K01

Used to remove diesel oxygen sensors. 12 point, 28mm size. For use with Scania Volvo... View Details

List: $87.60
(0) 6 POINT CUMMINS FUEL LINE SOCKETS
MST13900

22mm is used on the newest ISX generation Cummins motors. 19mm is found on most Cummins diesel engines before 2011. View Details

List: $39.25
(0) 8" DAVCO DIESEL FILTER WRENCH
DFW8

Designed to be used on a Davco aftermarket fuel filter system. Designed to loosen the filter vent cap on top and the main filter collar. Half-moon design provides easier access to the fuel filter and is made of high strength steel that prevents wrench from opening when loosening collar... View Details

List: $53.35
(0) DAVCO FILTER WRENCH
MST6914

Fits Davco Diesel filter models 232, 233, and 234 and opens the vent cap also. Stainless steel construction. Caterpillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines... View Details

List: $158.60
(0) DURAMAX GLOW PLUG BORE REAMER
OTC7223

Reams glow plug bores for proper replacement of glow plugs. Fits GM 6.6L Duramax diesel 2001 to present. View Details

List: $29.20
(1) 7.3L POWER STROKE FUEL FILTER
KD3526

For removal of Ford 7.3L diesel fuel filter caps. Works with two styles of cap from 1995 to present. View Details

List: $33.20
(0) 6" DAVCO DIESEL FILTER WRENCH
DFW6

Designed to be used on Davco aftermarket fuel filter system. Designed to loosen the filter vent cap on top and the main filter collar. Half-moon design provides easier access to the fuel filter and is made of high strength steel that prevents wrench from opening when loosening the collar... View Details

List: $95.65
(0) 24MM & 30MM NOX/SOOT SOCKETS
MST15500

Sockets are designed to remove NOX and particulate matter (SOOT) sensors. Often these sensors become very difficult to remove without destroying them because of heat cycles and the corrosive environment of the modern diesel exhaust system. Designed to drive all 6 sides of the hex equally to reduce the chance of damage... View Details

List: $57.90
(0) DURAMAX TURBO VANE SOCKET
MST1240

For medium-duty trucks with difficult accessibility of the sensor, this tool makes removal and installation easy. Correct geometry to reduce the possibility of damaging the sensor. Fits the confined location between the cold and hot sides of the turbo. View Details

List: $20.10
(0) INJECTOR SOCKET 7/8" X 1/2”
DSS3K02

Used to remove diesel oxygen sensors. 12 point, 7/8 (22mm) size. For use with Nissan, VW... View Details

List: $53.35
(0) 1/2" FUEL LINE DISCONNECT FOR VOSS
FLD1327

Two piece design allows easy access to Voss style connectors. Straight and 90° version to select depending on location of connector. Made from precision laser cut steel for long long life. View Details

List: $12.55
(0) WATER SENSOR WRENCH FOR DURAMAX 2012 AND NEWER
WSW14

Removes and installs the water sensor on 2012 and newer 6.6L Duramax diesel engines. Use when replacing the fuel filter or servicing the water sensor. Plastic sensor has a new hex design that could be damaged by tools, like pliers, that do not specifically fit the sensor. View Details

List: $200.85
(0) EGT SENSOR SOCKET SET
MST15300

Made from precision cast 4140 chromoly. Specially designed 6 point engages all 6 points at same time. Straight version allows precision re-torque with torque wrench... View Details

List: $12.55
(0) WATER SENSOR WRENCH FOR DURAMAX 2001 AND NEWER
WSW12

Removes and installs the water sensor on 2001 and newer 6.6L GM Duramax Diesel engines. Use when replacing the fuel filter or when servicing the water. View Details

List: $15.60
(0) OIL FILTER PLUG TOOL, CUMMINS
OFPTC

Used to plug the top of the oil filter when changing the oil on '13-'17 Ram Cummins 2500/3500 heavy duty trucks. Eliminates the mess, and the T-handle makes removal and installation easier. Allows the technician to pre-lube the filter before installation. View Details

List: $25.65
(0) SWIVEL GRIP OIL FILTER WRENCH FOR JOHN DEERE
OF60

Tough, stainless steel band with permanently bonded textured coating for superior gripping power that won't slip. Fits most John Deere tractors and also works on some Case, Case/IHC, Allis Chalmers tractors and other farm implement products with a range 4-3/4" to 5-3/16". "Swivel Grip" handle makes it easy to turn in tight spots... View Details