List: $90.60
(0) 3 PIECE FAN CLUTCH WRENCH
UFCW3

A nearly universal fan clutch wrench set for use on the most popular applications. Unique hooked wrench design will hold bolted on water pump pulleys by applying pressure against another bolt. Double-sided spanner style holding wrench will hold pressed on pulleys on many GM, Jeep and Dodge vehicles... View Details

List: $29.20
(0) FAN CLUTCH WRENCH 2-1/8" DRIVE
FCW218

Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Application: 2009 to 2010 International Navistar engines that are 13 and 15 liter MaxForce. Faster and easier than conventional fan clutch wrenches; no holding wrench is necessary. View Details

List: $74.00
(1) "BOLTED ON" WATER PUMP PULLEY
MST6160

This one-piece tool has a specially designed contour for easy use on vehicles using bolt-on water pump pulleys to enable the removal and replacement of the viscous fan clutch. This one-piece tool replaces all designs of water pump holding tools that hold the "bolt on type pulleys". No adjusting or fiddling, simply with only one hand, hook on the pulley bolt and hold to remove the viscous fan clutch... View Details

List: $29.20
(0) 1/2" DRIVE WRENCH
PDW435

Works great on harmonic balancer bolts, transmission bolts, cam bolts and others where an impact wrench won't reach. The right angle design gives you access to those hard to reach bolts. View Details

List: $37.25
(0) 40MM OPEN END WRENCH
3422

40mm wrench. View Details

List: $215.45
(4) PNEUMATIC FAN CLUTCH SET
PFC440

Quickly remove and install the fan clutch when repairing the water pump or fan clutch. Does the job much faster than conventional fan clutch wrenches. Set includes 7 driving wrenches that fit Ford, GM and Chrysler; 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2" in a plastic storage case. View Details

List: $113.25
(0) FAN CLUTCH WRENCH SET
MST6120

Two piece kit gives the professional technician the ability to service all fan clutches that have bolt on pulleys on the water pump. Works with Chrysler, GM, Ford, Land Rover and Mazda (Not including the 4.9 liter 6 cylinder Ford). View Details

List: $37.25
(0) UNIVERSAL CLUTCH HOLDING TOOL
AC90499

Positive locking action. Fully adjustable to match a variety of applications. Holds the clutch hub stationary during removal and installation. View Details

List: $33.20
(0) UNIVERSAL PULLEY HOLDER
3900

Used to remove and replace thermostatic fan assemblies while eliminating the need for various size holding wrenches. Applications include: Ford trucks with 2.8L, 2.9L, 3.0L, 4.0L, 4.9L and 5.0L engines; Dodge trucks with 3.9L, 5.2L, 5.9L, 8.0L V10 engines; GM trucks with 4.3L, 5.0L and 5.7L engines; Jeeps with 5.2L engines. View Details

List: $78.00
(0) 36/48MM DOUBLE FAN CLUTCH WRENCH
MST9521

Most popular sizes of viscous fan clutch hex couplings are either 36 mm or 48 mm. This double ended wrench was developed to reduce the cost of purchasing two wrenches, which are needed when performing a variety of fan clutch jobs. When the MST9521 is used with MST6160, most Chrysler, Ford, GM & Land Rover applications can be performed on vehicles that have bolt on water pump pulleys. View Details

List: $169.15
(1) UNIVERSAL FAN CLUTCH SERVICE KIT
UFC500

For removing both bolt on and pressed on pulleys . Includes universal pulley holder and an upgraded version with replacement pins for use with both pressed on pulleys and can also be used for cam sprocket holding and adjustment. Holding wrenches include 22mm, 36mm, 40mm, 47mm and 50mm holding tools and four pin sets from 8mm to 18mm... View Details

List: $101.70
(0) GM/CHRYSLER PULLEY HOLDER
MST9980A

Specially designed tool is used on vehicles using pressed on pulleys. Billet chromoly bulkhead pins. Used on the following applications:... View Details

List: $37.25
(0) 36MM OPEN END WRENCH
3136-76

36mm wrench. View Details

List: $65.95
(0) FAN CLUTCH SPANNER WRENCH
FCW441

Double-sided tool with two pin configurations, two prongs on each side on the other to hold pressed pulleys with holes in place while loosening the fan clutch. Use with a 36mm fan clutch wrench on GM, Chrysler and Jeep truck, van and SUV applications from '99 and on for GM, and '98 and on for Chrysler and Jeep. For GM '99 and newer 4.8L, 5.3L and 6.0L; Chrysler '98 and newer 3.9L, 4.7L, 5.2L, 5.9L and 8.0L; Chrysler factory replacement water pumps '93 and newer 3.9L, 5.2L, 5.9L and '97 and newer 8.0L. View Details

List: $31.20
(1) 7/8" DRIVING WRENCH FOR FORD RANGER 3.0L ENGINES 1993 AND NEWER
PFCA43430

7/8" Adapter for PFC43300 Pneumatic Fan Clutch Wrench Kit fits Ford Ranger 3.0L engines, 1993 and newer. View Details

List: $89.60
(0) FAN CLUTCH WRENCH SET
MST3472

Used to remove and replace thermostatic fan assemblies while eliminating the need for various size holding wrenches. Applications include: Ford trucks with 2.8L, 2.9L, 3.0L, 4.0L, 4.9L and 5.0L engines; Dodge trucks with 3.9L, 5.2L, 5.9L, 8.0L V10 engines; GM trucks with 4.3L, 5.0L and 5.7L engines; Jeeps with 5.2L engines. View Details

List: $76.00
(0) BMW, AUDI AND VW 32MM FAN CLUTCH WRENCH
MST6210

32mm wrench is 17" to reach down to the fan clutch hex coupler. Works on all BMW models. For 3, 5, 7, 8, X and Z Series BMW applications, Audi 1996 and later (except pressed on pulleys) VW 1998 and later (except pressed on pulleys). View Details