List: $137.95
(0) POWERBAR II CRANKSHAFT BOLT REMOVAL TOOL
PB70866

Ideal for Honda crankshaft bolt removal, generating up to 600 ft. lbs. of force which exceeds most 1/2" drive impact guns. Bi-directional force loosens or tightens bolts. Saves repair time - No need to remove parts to access the crankshaft bolt or harmonic balancer pulley... View Details

List: $81.55
(0) DODGE/CHRYSLER V6 CAM HOLDER
MST1210

Use on 18 different models of Dodge and Chrysler cars, trucks, SUVs and Vans; 1995-2010 Dodge Chrysler 3.5L V6, 2007-2011 Dodge Chrysler 4.0L V6. Center hole supports socket used on the bolt. Holds at the center hub of the gear, reducing the possibility of breaking the gear... View Details

List: $79.95
(1) UNIVERSAL CAMSHAFT PULLEY HOLDER
MST9680

Designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. While useful on most Asian overhead cam engines, it is most needed on transverse mounted V6 engines such as the VG30 used in Nissan Maximas as well as the 3VZFE and lMZFE engines used in Toyota Camrys. Rear pulleys on these models are in very close proximity to the shock tower making removal and replacement difficult without this locking device. View Details

List: $85.90
(1) GM ENGINE MOVING TOOL
419X

Fits GM front wheel drive vehicles with engine torque struts. Replaces existing torque strut and allows engine to be tilted forward to access the back of the engine and accessories. Extra bold holes provide fit on most vehicles... View Details

List: $38.25
(0) VW/AUDI TENSION PULLEY WRENCH
MST8640

Use on VW and Audi through 1997 to adjust crankshaft spur belts with idler pulleys with pin holes. Heat treated alloy steel, black finish, soft grip handle. View Details

List: $34.75
(1) GM DURAMAX FLYWHEEL LOCK
MST6925

Designed to hold the flywheel stationary when removing or replacing the crankshaft bolt. Saves time by not removing the starter motor. Holds the engine in place for high torque requirements... View Details

List: $262.95
(0) CAMSHAFT BEARING TOOL
CBT18

Remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range: 1.125" to 2.69" (28.58 - 68.3mm). Expander has a neoprene sleeve over which the split driving plugs are mounted and expanded to size... View Details

List: $49.45
(1) FLYWHEEL TURNER
FT23800

Use this special wrench to turn the flywheel and rotate the engine. Folds for easy storage. Also holds the flywheel or flex plate when torqueing the flywheel or harmonic balancer bolts. View Details

List: $63.95
(0) UNIVERSAL CAM ADJUSTER
UCA38220

Works on all single and dual overhead cam sprockets with holes and will hold or turn cam sprockets. Insert the holding pins into opposing holes on the cam sprocket, turn tool handle to adjust the cam position. Can also be used to hold the cam sprocket in place when removing the cam bolt. View Details

List: $60.95
(0) DOHC LOCK TOOL
CLT36880

Adjustable tool locks and holds both camshaft sprockets firmly in place. Locks camshaft sprockets in place during timing belt / chain replacement. Preserves the engine timing during belt or chain replacement... View Details

List: $34.10
(0) MITSUBISHI TENSION PULLEY WRENCH
MST9870

Designed to allow easy adjustment of camshaft spur belts with pin-holed idler pulleys. Grips pulley center and rotates it around the off center retaining bolt, allowing for adjustment. Covers most 1990 and later Mitsubishi 4- and 6-cylinder engines (except minivan applications)... View Details

List: $48.05
(0) GM DURAMAX DIESEL SERVICE SET
MST6920

Works on all GM Duramax diesel trucks 2001 - present 6.6L. 36mm, 12 point, 3/4" drive impact socket removes the crank bolt which requires a torque of 285 ft. lbs. 14mm, 1/2" drive stubby impact Allen socket aids the technician in removal and installation of the flywheel... View Details

List: $64.95
(0) SUBARU CRANK PULLEY HOLDER
SUBCPH198

Designed to hold harmonic balancer in place for easy removal or installation. Combines the individual tools available into one tool while also increasing applications. Eliminates the need to remove the radiator to make space for an impact wrench... View Details

List: $43.45
(1) FORD CAMSHAFT ALIGNMENT KIT
FCSA10

Recommended for use when servicing the timing belt, chains, head gaskets or other valve train repairs on Ford, Mercury and Mazda vehicles. Comes with an aluminum camshaft bar plus one short TDC timing pin and one long top dead center pin. Long TDC timing pin is used with 2.0L DOHC Zetec engines found in Contour, Mystique: 1994-2002, Focus and Mazda... View Details