List: $27.95
(0) TOY/LEXUS AXLE NUT LOCK RING
MST6438-2

Specially designed lock nut release tool allows unlocking the axle nut lock ring prior to removing axle nut. The unique angle designed in the tip of the axle lock release tool lifts the axle nut crimp with ease. Once the axle nut lock ring is unlocked, using the MST6438-1 will easily remove 30 mm axle nuts on most Toyota and Lexus vehicles... View Details

List: $423.95
(0) PRESS AND PULL STARTER KIT
UPPS399

Universal tool set for extracting and mounting silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing bushes and more. Inner sleeves are made out of non-hardened metal for easy adjustments or reshaping. Nuts include bearings to further reduce friction... View Details

List: $480.50
(0) CLAMSHELL STRUT TOOL
M7560

Fits a wide range of springs and struts. No special adapter shoes. Safety locking pins hold jaws in place... View Details

List: $89.95
(0) 21MM 24MM ALIGNMENT WRENCH
MST1290

21mm 12 point with Special angle and bidirectional offset to access difficult to reach bolts. 24mm 12 point deep offset for access to guarded bolt heads without the sloppiness of breaker bar and socket. 24mm 12 point deep offset for access to 12 point bolt heads with access to lock nuts through the socket. View Details

List: $34.95
(0) STAR SHAPE 17MM IMPACT SOCKET
LT5110

Works on 2012 to present Mercedes S-Class vehicles. Custom fitted for Mercedes anti-theft star shaped lugnut. A must for tire and brake service shops. View Details

List: $38.95
(0) TIE ROD ADJUSTING TOOLS
7097

Each tool allows easy toe-in adjustments; leverage applied with 1/2" drive ratchet or breaker bar. 7095 - for compact cars with 3/4" dia sleeves. 7096 - for larger cars with 7/8" dia sleeves... View Details

List: $19.35
(0) SHOCK ABSORBER SOCKET
SPS28

3/8" drive x 1" long for shock absorber and power steering adjustment on some Chrysler products. View Details

List: $28.80
(0) HUB BEARING REMOVER 12 MM
MST6961

This unique tool was designed to remove the hub bearings that are rusted to the steering knuckle. No press required. Saves 1 hour+ on stubborn hub bearings... View Details

List: $36.95
(0) TIE ROD ADJUSTING TOOL
MST7095

Adjust with accuracy. For use on compact cars with ¾" diameter adjusting sleeves. Access made easy. Permits 360º rotation of adjusting sleeve even where space is limited. Maximize your leverage. ½" square drive for use with a ratchet or breaker bar. View Details

List: $94.95
(0) 25-55MM INNER TIE ROD TOOL
ITRT788

Patented design which adjusts from 25-55mm to fit most inner tie rod sizes. 3-5 times the adjustment range of most similar designs. Tested to 150 ft. lbs. of torque. View Details

List: $157.95
(1) INNER TIE ROD TOOL MASTER SET
TRT50

Our most popular tie rod tool with extra crows feet in a blow molded case. Kit contains: 29mm, 32.5mm, 33.6mm, 1-1/4", 1-3/16", 1-3/8", 1-1/2", 1-5/16" and 1-7/16". View Details

List: $63.90
(0) UNIVERSAL INNER TIE ROD TOOL
TRT48

Removes inner tie rods with a completely round end socket. No-flat applications include: '00-'03 Dodge Neon, '00-'01 Plymouth Neon, and '01-'03 Dodge and Chrysler Minivans, also fits some no-flat applications on Ford and Nissan. The universal wrench is designed to remove and install all inner tie rod sockets up to 1-31/64" regardless of the rod socket configuration... View Details

List: $48.95
(0) TIE ROD SLEEVE TOOL
TRW7023

Tie rod tool with 4-position feature to locate tool to grip sleeve properly. Allows 360 degree rotation of sleeve. For most models of compact and standard size passenger cars and light trucks. View Details

List: $58.45
(0) MACPHERSON STRUT COIL TOOL
CC63000

Quickly and easily work on the MacPherson Struts. Use with impact wrench or hand tool ON or OFF the car. Contains complete instructions and safety kit... View Details

List: $21.25
(2) SUBARU AXLE PIN REMOVAL TOOL
LT730

Removes and installs roll pins for easy axle removal. Magnetized tip prevents roll pin from falling into hidden access areas around axle and holds new roll pin for easy alignment and insertion into new axle. Works on all Subaru trans-axle assemblies. View Details

List: $54.55
(1) TOYOTA/LEXUS FRONT AXLE LOCK NUT REMOVER KIT
MST6438

Axle nut lock ring release tool for the 30mm axle nut found on many Toyota and Lexus front and rear wheel drive vehicles. Works on: Toyota Avalon 2002 and later, Camry 2002 and later, Corolla 2003 and later, Prius 2001 and later, Sienna 2002 and later, Solara 2004 and later. Lexus ES300 2002-2003, ES330 2004-2006, ES350 2007 and later, RX300 1999-2003, RX330 2004-2006, RX350 2007 and later. View Details

List: $23.85
(0) INNER TIE ROD TOOL
ITRT94

Easily and quickly remove smooth inner tie rods without having to remove the outer tie rod. Excellent for repairing rack seals. Fits most inner tie rods... View Details

List: $186.00
(0) ADJUSTABLE BEARING SEAL DRIVER
ABSDU

Adjustable head to fit multiple sizes. Locking collar easily locks the tool in position. Steel striking end... View Details

List: $174.95
(2) INNER TIE ROD TOOL REMOVER/INSTALLER
ITRT299

Slips on easily and does away with fumbling for separate size attachments, saving time and money. Removes and mounts inner tie rods with patented roller and cam mechanism. Grips securely on round, hexagonal and octagonal tie rods from 35mm - 45mm. View Details

List: $36.95
(0) TIE ROD ADJUSTING TOOL
MST7097

Adjust with accuracy. For use on light trucks with 1-1/8" diameter adjusting sleeves. Access made easy. Permits 360º rotation of Pitman arm even where space is limited. Maximize your leverage. ½" square drive for use with a ratchet or breaker bar. View Details