List: $44.80
(0) EMERGENCY BRAKE REMOVAL TOOL
TH451

For domestic and import vehicles using an emergency brake cable at the rear wheels, including all drum brake applications and some rear disc brake vehicles. View Details

List: $102.70
(3) REAR DISC BRAKE CALIPER TOOL
DB25

For rotating pistons back into the caliper to provide clearance for new pads. Includes 5 adapters (1-1/2", 1-5/8", 1-7/8", 2-1/8" and 2-1/2") for use in both 2 and 4-wheel rear disc brake assemblies of most domestic and import cars. Can be used "on" or "off" vehicle... View Details

List: $12.55
(3) DISC BRAKE PAD SPREADER
MST97A

Compresses disc brake piston for easy pad installation. For installing pads on most domestic and import cars and light trucks. View Details

List: $180.75
(0) COMBINATION DISC BRAKE TOOL
DB350

Designed to work on rear disc brakes that require the piston to rotate back into the caliper. Comes with 2 double sided adapters and includes a blank adapter so the tool will work on front disc brakes. Works on right hand or left hand thread pistons... View Details

List: $61.90
(0) BRAKE CALIPER FILE - JAPANESE VEHICLES
BCF202

Brake caliper file with scraper. High quality ergonomic handle. Extra small application for Japanese vehicles. View Details

List: $66.95
(4) 4-IN-1 BRAKE CALIPER PRESS
BCP41

Works on twin and quad piston fixed calipers and single and twin piston floating calipers. Centrally located ratchet evenly distributes force to prevent misalignment of pistons. Ratchet allows for a full 360° swing so the spreader may be placed at any position... View Details

List: $194.85
(0) QUICKDIAL PUMP KIT
MDPKIT

High quality diagnostic tool. 2-way pressure and vacuum test functions. Intuitive rotary dial mode switch... View Details

List: $29.70
(2) BRAKE "C" RING REMOVER
BRR1

Removes "C" ring that couples emergency brake actuation lever to the rear brake shoe on most Fords, Chryslers and imported vehicles. View Details

List: $18.95
(0) 12MM HEX GRIP IMPACT SOCKET
HG11M12

Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact. Use to remove rusted and rounded hex bolts and nuts and install new fasteners. 22mm (7/8”) outside hex body for low profile use when paired with a wrench... View Details

List: $18.95
(0) 3/8" HEX GRIP IMPACT SOCKET
HG11S12

Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact. Use to remove rusted and rounded hex bolts and nuts and install new fasteners. 22mm (7/8”) outside hex body for low profile use when paired with a wrench... View Details

List: $20.50
(0) 11/16" HEX GRIP IMPACT SOCKET
HG11S22

Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact. Use to remove rusted and rounded hex bolts and nuts and install new fasteners. 22mm (7/8”) outside hex body for low profile use when paired with a wrench... View Details

List: $57.90
(0) BRAKE CALIPER FILE
BCF200

High quality, ergonomic handle. Includes scraper. View Details

List: $39.25
(0) FORD POWER STEERING EVACUATOR ADAPTER
MVA662

Custom designed to fit late model Ford vehicles. Installs in place of the power steering reservoir cap. Designed for use with MVP5000 hand vacuum pump. View Details

List: $470.75
(1) PRESSURE BRAKE BLEEDING SYSTEM
MVP6800

Pressure pump system forces new brake fluid down through the master cylinder while air and old fluid are expelled through the bleed screw(s). Pressure gauge allows control of the system pressure; pressurized reservoir allows the operator hands-free movement to the bleed screws. Includes a manual fluid dispensing system with seven master cylinder adapters to connect to most American, Asian and European cars and light trucks... View Details

List: $84.55
(0) CLAMP ON AUTO REFILL KIT
MV6832

Large 40 oz. fluid reservoir. Clamps-on to master cylinder to provide correct fluid levels while bleeding brake or hydraulic clutch systems. Adapts for use with 12 and 32 oz. brake fluid bottles... View Details

List: $17.60
(1) DISC BRAKE PISTON TOOL
MST55A

Rotates piston back into caliper when replacing pads. Fits most domestic and some imports. Used on vehicles with four wheel disc brakes... View Details

List: $18.95
(0) 13MM HEX GRIP IMPACT SOCKET
HG11M13

Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact. Use to remove rusted and rounded hex bolts and nuts and install new fasteners. 22mm (7/8”) outside hex body for low profile use when paired with a wrench... View Details

List: $18.95
(0) 7/16" HEX GRIP IMPACT SOCKET
HG11S14

Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact. Use to remove rusted and rounded hex bolts and nuts and install new fasteners. 22mm (7/8”) outside hex body for low profile use when paired with a wrench... View Details

List: $20.95
(0) 3/4" HEX GRIP IMPACT SOCKET
HG11S24

Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact. Use to remove rusted and rounded hex bolts and nuts and install new fasteners. 22mm (7/8”) outside hex body for low profile use when paired with a wrench... View Details

List: $23.50
(0) 7/8" HEX GRIP IMPACT SOCKET
HG11S28

Patented design allows removal of bolts and nuts up to 90% rounded by biting exclusively into the flats, only griping tighter with each impact. Use to remove rusted and rounded hex bolts and nuts and install new fasteners. 22mm (7/8”) outside hex body for low profile use when paired with a wrench... View Details