List: $4.20
(0) HEX BALL AIR CHUCK
17350

Shut off valve is built into the chuck's head. For direct air lines only (not for use with automatic gauges). View Details

List: $10.75
(0) TIRE GAUGE 1-20 PSI
17521

Low pressure readings at their best. Perfect for home garden tractors, golf carts, air springs, and ATVs. Calibrated 1-20 PSI in 1/2 lb. units. View Details

List: $84.85
(0) INFLATOR GAUGE
A101A

Dual foot chuck inflator with 12" hose for use on trucks and buses. Solid brass bar calibrated 10 to 120psi in 2psi increments. Heavy chrome plated castings with protective sleeve over dial tube. View Details

List: $132.45
(1) DIAL INFLATOR GAUGE
135A

Heavy-duty, dual foot dial inflator gauge with 12" steel stem for long reach. Calibrated dial from 0-160psi and 0-1100kPa scale. Protective rubber boot for dial gauge... View Details

List: $72.40
(3) 10-120PSI INFLATOR GAUGE
A100A

Straight-on tapered chuck inflator with 12" hose. Solid brass bar is calibrated 10-120psi in 2psi increments. Heavy chrome plated castings with protective sleeve over dial tube. View Details

List: $89.95
(1) HEAVY DUTY INFLATOR GAUGE
A101HDA

Dual foot chuck inflator with 12" hose. Solid brass bar calibrated 10 to 120psi in 2psi increments. Heavy chrome plate casting with protective sleeve over dial tube... View Details

List: $33.50
(0) GAUGE FOR #135
135DG

Gauge. View Details

List: $11.50
(0) HEX BALL CLIP ON AIR CHUCK
17353

Clip on mechanism holds the chuck on the valve stem during inflation. Shut off valve is built into the chuck. For direct air lines only (not for use with automatic gauges). View Details

List: $33.95
(4) DIGITAL TIRE PRESSURE GAUGE
DT100

Reads up to 100psi in .5 increments. Automatic shut off 15 seconds after use to prolong battery life. Operating temperature range of 15° to 110° F. View Details

List: $14.10
(0) STRAIGHT DUAL FOOT CHUCK
17396

1/4" F.P.T. 6" long. Straight-on chuck with threaded, deep-well lock nuts which lock onto valve mouth when tilted. View Details

List: $27.05
(1) INSIDE DUAL WHEEL TIRE GUAGE
17565

Designed for the difficult-to-reach inner dual. Straight-On chuck for inside wheel and 30° reverse angle for outside wheel. Calibrated 10-150 PSI in 2 lb. units. View Details

List: $61.60
(1) 10-90PSI INFLATOR GAUGE
A150A

Straight-on tapered chuck inflator with 12" hose. Solid brass bar calibrated 10 to 90psi in 2psi increments. Heavy chrome plate casting with protective sleeve over dial tube. View Details

List: $54.85
(1) 2 IN ONE TIRE PRESSURE GUAGE
MATTPD125

Works like a standard dial display tire pressure gauge displaying PSI and KPA for a wide range of pressure measurements making the gauge applicable to a wide range of tires. The pressure reading is then kept on the display until the release button is pushed. Works like a standard dial display tire pressure gauge displaying PSI and KPA... View Details

List: $46.40
(0) 12" DUAL FOOT TIRE CHUCK
TC12

E-Z Grip air chucks; comfortable hand grip. 1/4" NPT end will accept an air line quick disconnect fitting. Straight on dual head tools: permits access to hard-to-reach valve stems on inner tandem wheels... View Details

List: $23.80
(1) HOSE F/A101
AC113

View Details

List: $65.95
(0) TIRE INFLATOR GAUGE
MAT100

10-120psi inflator. 1/4" NPT 13" long hose. View Details

List: $14.65
(0) DUAL WHL TIRE GAUGE 20-120 PSI
17525

For use on dual wheels and other difficult-to-reach valves. Short enough to fit in your pocket yet has a wide enough range to handle both cars and trucks. Calibrated 20-120 PSI in 2 lb. units and from 160-880 kPa in 20 kPa units. View Details

List: $24.15
(2) LOCK ON AIR CHUCK
17373

Works like a quick coupler. Snaps onto a standard valve and stays put until released. 1/4" NPT Female. View Details

List: $28.30
(0) DUAL WHL TIRE GAUGE 10-150 PSI
17545

Ideal for dual wheels as well as other difficult to reach valves on RV's heavy trucks off road equipment. Dual foot service gauge designed for heavy duty use. Dual foot Chuck... View Details

List: $32.65
(0) 7" SINGLE CHUCK
TC7

E-Z Grip air chucks; comfortable hand grip. 1/4" NPT end will accept an air line quick-disconnect fitting. Sealed ball air-chuck in extended 1" from handle to allow access to tight areas. View Details