Tool Catalog
View Print Tool and Tool Storage Catalog
E-Z-Macro-Hook XEL insulation-piercing test connector leads to standard alligator clips, set of 1 red and 1 black. Easily isolate a single wire within a bunch or nest of wires. The chisel tip design provides technicians with the ability to separate wire bunches and quickly select the wire to be tested... View Details
Easily isolate a single wire within a bunch or nest of wires. The chisel tip design provides technicians with the ability to separate wire bunches and quickly select the wire to be tested. The fully insulated shaft is made of durable nylon and prevents shorts from occurring... View Details
Replacement leads for your digital multimeter. Included alligator clips for versatility. 5’ leads... View Details
Flat blade adapter allows connectivity to female blade fuse sockets and flat terminals. Back probe adapter allows connectivity to all electronic terminals on back side of connector without damaging seals. Adapts standard 4mm banana jack test leads... View Details
Includes: (1) black test lead, (1) red test lead, (2) multimeter probes, (2) banana plugs, (2) bed-of-nails clips and (2) alligator clips . View Details
1.5m silicone insulated wire resists heat and cold. CAT III 100V, 10A and CAT IV 1,000V, 10A rated. View Details
Includes: (1) black test lead, (1) red test lead, (2) multimeter probes, (2) banana plugs and (4) alligator clips. Banana plugs are 4mm. View Details
Performs voltage drop tests with the push of a button and finds problems in corroded wires/connections and shorts to ground. Steady pin probe tips allow the probe tip to sit firmly on the male ECM or connector pin. Applies approximately 0.5A load to a 12V circuit and works with your existing multimeter... View Details
AC220C - Plunger Style Alligator Clips (CAT IV 600V, CAT III 1000 V, 10 A Rating ). TP220 - Sharp Test Probes (CAT II 1000 V, 10 A Rating). TL222 - Right-to-Right Test Leads (CAT IV 600V, CAT III 1000 V, 10 A Rating)... View Details
Voltage drop test with the push of a button. Finds corroded wires/connections and shorts to ground . Diagnose faster and earn more money - works with your existing DMM ... View Details
Adapters connect to digital multimeters and scopes via the included 48" stacking banana plug test leads. Connection to just about any brand digital multimeters or scope is no problem. Kit includes 7 different size adapters of flat/spade type connector terminals... View Details
Hooked needle points pierce insulation of heavy-duty wire and cable up to 1/8" diameter for accurate contacts. One-piece, nickel-silver hook contact is spring loaded for strong clamp-on. 18" test leads with alligator clips... View Details
Designed for use with accessories or adapters with your digital multimeter. (2) 10' gold plated leads. 10-gauge multi-strand wire... View Details
Low cost and practical. (2) 30" leads of highly insulated wire. View Details
Features adjustable length test tips that meet all safety requirements while providing the versatility needed for most measurements. Extra heavy-duty strain relief on both probe-end and plug-end which have been tested beyond 30,000 bends without failure. Double insulated silicone leads can withstand high temperatures and remain flexible in cold temperatures... View Details
Strong tips and integral strain relief provide extended service life. View Details
Includes: test leads, alligator clips, hook clips, test proves, magnetic hanger and K-type thermocouple temperature probe. View Details
48" test leads feature threaded screw-off alligator clips and work with most multimeters. Maximum 10A. CAT III 1,000V rated. View Details