List: $19.45
(0) TEMP PROBE F/ MDTECHPLUS
MDTP-3

View Details

List: $76.45
(0) 2 LEAD X 15' RETRACTABLE LEAD
MTL7

Included adapters work interchangeably with banana plugs. Use with any meter equipped with standard banana jack connector. Includes: one pair test probes, one pair of alligator clips and one pair of spring hooks... View Details

List: $26.95
(0) SUREGRIP TEST PROBES
TP220

Sharp 0.5" stainless steel tip provides reliable contact. Flexible finger barrier improves grip. CAT III, 1000V, 10A. View Details

List: $41.45
(1) MAGNETIC TEST LEAD SET W/ALLIGATOR CLIPS
MAG138

Two high power, low resistance magnets hold the probe to the lead and eliminate the need to hold probes while checking or monitoring a signal. Disconnect the test probe and "stick" to any metallic ground or test point. Works with most DMMs and hand-held scopes. View Details

List: $48.95
(0) 2 LEAD X 30' RETRACTABLE LEAD WITH MAGNET
AE1138

Retractable test leads pull out and stay at desired length. Integrated magnets allow attachment to metal surfaces such as: lifts, undercarriages, carts, hoists and toolboxes. Rewind test leads into protective case when not in use... View Details

List: $33.95
(0) HEAVY-DUTY TEST LEADS
EZH1

Hooked needle points pierce insulation of heavy-duty wire and cable up to 1/8" diameter for accurate contacts. One-piece, nickel-silver hook contact is spring loaded for strong clamp-on. 18" test leads with alligator clips... View Details

List: $50.85
(0) TWIN 5'COIL CORD/PIERCING
MD2518

View Details

List: $27.95
(0) 2 PIECE BACK PROBE PINS
PME6544

Adapter allows access to hard to reach test points into flexible weather sealed connectors. Snaps on to Pomona meter probes with .080" tips. IEC 1010 rated. View Details

List: $22.95
(0) DMM ADAPTER LEADS KIT
MDPPTK02

Designed for use with accessories or adapters with your digital multimeter. (2) 10' gold plated leads. 10-gauge multi-strand wire... View Details

List: $89.95
(0) DEUTSCH JUMPER WIRE REPLACEMENT PARTS KIT
MD508RPL

Kit includes: necessary wires, terminals, butt splices and heat shrink to repair most damaged Deutsch circuits. All terminals are machine crimped to manufacturer specifications. View Details

List: $87.95
(0) BOSCH JUMPER WIRE KIT
MD512

Tests current inside circuits without probing wires. Can be used as single test lead or as jumper wires. Jumper wire kit allows testing for connectors using Bosch, BDK and JPT terminals... View Details

List: $212.45
(0) FLUKE MASTER TEST LEAD SET
TLK289

Includes: test leads, alligator clips, hook clips, test proves, magnetic hanger and K-type thermocouple temperature probe. Includes:. TP220 - TEST PROBES... View Details

List: $40.95
(0) SUREGRIP TEST LEADS
TL224

1.5m silicone insulated wire resists heat and cold. CAT III 100V, 10A and CAT IV 1,000V, 10A rated. View Details

List: $21.95
(1) 3 LEAD X 10' RETRACTABLE LEAD
AE1129

Retractable test leads pull out and stay at desired length. Rewind test leads into protective case when not in use. Include insulated alligator clips... View Details

List: $39.95
(0) 2 LEAD X 30' RETRACTABLE LEAD
AE1137

Retractable test leads pull out and stay at desired length. Rewind test leads into protective case when not in use. Include insulated alligator clips... View Details

List: $24.95
(0) RELAY TEST JUMPER WIRE SET
RTJ69

Use jumper wire between common and open-to-close circuits for testing. Features different types of connections that easily connect to a multimeter. View Details

List: $56.95
(0) 5' TWIN MULTIMETER PIERCING JUMPER LEAD SET
MD2517

Includes: (1) black test lead, (1) red test lead, (2) multimeter probes, (2) banana plugs, (2) bed-of-nails clips and (2) alligator clips . View Details

List: $54.95
(1) INSULATION PIERCING TEST CLIPS
PM6405

Connect to insulated wires without cutting into insulation. Works with any banana plug or meter test lead and features a spring loaded slider to hold wire centered. Fits wires from .030"-.180" diameter insulation... View Details

List: $40.95
(0) FLUKE ALLIGATOR CLIPS
AC175

Insulated alligator clips with flexible boots feature a 5/16" jaw opening for use with Fluke meters. Threaded shaft twists on but also works as a secure slide-on attachment clip for non-threaded 2mm diameter test probes. Current rating: 10A... View Details

List: $123.45
(0) DEUTSCH JUMPER WIRE TEST KIT
MD508

Test circuits while terminals are still in the connector. If terminal is deemed defective, remove the terminal using the correct terminal release tool, cut the defective wire and splice. Kit includes: three sets of two jumper wires for three different sizes (14, 16 and 20 contact sizes) and four terminal tools to remove damaged terminals. View Details