Fuse

11A/1000V AC and DC IR20kA (10 x 38mm) for MD319 digital multimeter. View Details

Attach adapter to fuse or touch probes to top of the fuse to measure automotive amperage instantly without removing the fuse. Audible tone lets you know when you have connection with a fuse and if there is current present in the circuit; perfect for working on under-the-dash fuse boxes. Snapshot Mode and Tracking Mode allow easy component testing and parasitic drain location... View Details

To find shorts, push or pull the offending wire and hear a loud beep. Features re-set/re-power capability for dead shorts to keep working hands free. Set amp levels at 10A, 15A, 20A, 25A and 30A. View Details

Tests circuit current from 0 to 30A. Checks blower motor and fuel pump amperage draws and performs current readings on A/C compressors that are not easily accessible. Features three interchangeable test functions: 30A ATC fuse, 30A mini fuse and 30A all purpose... View Details

Tests circuit current from 0 to 80A. Resolution: .1A (100 mA). Accuracy: + or - 2%... View Details

0.63A/500V AC IR50kA (6 x 32mm) fuse for MD251 and MD257 digital multimeters. View Details

View Details

Finds short circuits without wasting fuses, especially during aftermarket electronics installation. Helps install radios, CD players, radar detectors and accessories with ease. The BuzzAlert™ module plugs in-line to your Fuse Saver® and sounds an alert when the circuit shorts... View Details

Replacement Fuse 20A for Matco MD592 and MD582 Meters. Larger Fuse. View Details

Tests circuit current from 0 to 30A. Fuse is removed during testing and placed into Fuse Buddy to maintain fuse protection. Fuse Buddy stays put and won't fall out of the socket like test probes do. View Details

10A/600V AC IR100kA (10 x 38mm) fuse for MD251 and MD257 digital multimeters. View Details

440 MA, 100 volt fuse. View Details

Fits all Maxi, ATO and Mini automotive fuse sockets. Easy access connector tabs fit: 1/4" female quick connects, alligator clips, jumper leads and multimeter test leads. Plated contacts for maximum conductivity and durability. View Details

Chase down short circuits without blowing fuses. Allows a technician to move around a vehicle shake testing wires while looking for the short. Dual-type fuse box connector with 10' cord eases the installation of radios, CD players, radar detectors and other accessory equipment... View Details

0.4A/1000V AC and DC IR30kA (6 x 32mm) fuse for MD319 digital multimeter. View Details

30A breaker handle. View Details

Tests all three fuse sizes: Micro, Mini & ATO circuits. New improved adapters allow better accessibility in tightly spaced fuse boxes. Plug in the Fuse Buddy and read circuit amp draws... View Details