List: $35.65
Used for breaking free steering knuckle/suspension joints using an impact hammer. Nut must be threaded all the way onto knuckle/suspension joints threaded shafts. 14mm x 1.5... View Details
List: $35.65
Used for breaking free steering knuckle/suspension joints using an impact hammer. Nut must be threaded all the way onto knuckle/suspension joints threaded shafts. 12mm x 1.5... View Details
List: $27.00
List: $34.60
List: $31.95
Helps in staking axle nuts that use a crush-type anchoring system and reduces the chance of damage to the axle threads. Use with your Matco air hammer, making it quick and easy to disengage/engage the crimp. 8.75" length x .5" diameter. View Details
List: $29.65
6" Pneumatic Cold Chisel, 5/8" cut. Designed to cut bolts, nuts, tees, angles and frame members. Use with .401 parker shank. View Details
List: $61.10
List: $31.95
Helps in removing axle nuts that use a crush-type anchoring system and reduces the chance of damage to the axle threads. Use with your Matco air hammer, making it quick and easy to disengage/engage the crimp. 8.75" length x .5" diameter. View Details
List: $45.95
Unique tip makes it easier to move the C-Clip on Ford, GM and Dodge vehicles when used with an air hammer. Works on a variety of vehicles that use a U-joint with a C-clip retainer. Easily removes C-clips stuck in rust, dirt and grime. View Details
List: $37.50
Made from silica alloy steel for superior fatigue and flex resistance. Use with .401 parker shank. Designed to remove and install replaceable valve guides. View Details
List: $28.80
List: $74.35
18" Pneumatic Chisel, 5/8" blade. Designed to cut bolts, nuts, tees, angles and frame members. View Details
List: $25.95
List: $50.50
Designed to release and stake the crush type axle nuts equipped on modern vehicles. MST130 helps in removing and replacing axle nuts that use a crush-type anchoring system and reduces the chance of damage to the axle threads. Fully crimps the nut, eliminating the chance of axle nuts coming loose... View Details
