List: $79.95
Left handed master extractor set for removing broken bolts, studs, screws and lugs. Includes five M42 cobalt mechanic's length left-hand drill bits in 5/64", 7/64", 5/32", 1/4" and 19/64". For fastener thread sizes 3/32" – 5/8" (M3-M16)... View Details
List: $349.95
Master extractor set with spiral fluted and multi-spline extractors paired with matching left-hand cobalt drill bits. For removing broken or difficult to remove bolts, screws, studs, pipes, set screws, and lugs that are below, above or flush with the work surface. Includes spiral fluted extractors #1 - #6, multi-spline extractors 1/8" to 1/2" by 32nds, and left-hand cobalt drill bits: 5/64", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 19/64", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32" and 1/2". View Details
List: $36.95
Drill hole in seized, rusted or broken fastener then drive extractor into and turn to remove. Straight flute design works on both standard and reverse threaded fasteners. Includes sizes: 1/8", 3/8", 7/16", 1/2" and 5/8" for fastener studs 1/4" to 5/8"... View Details
List: $119.95
Hex head multi-spline extractors for broken of difficult to remove studs, bolts, fittings and socket screws and more. Includes the most common sizes from 1/8" to 7/8" drill hole in 1/32" increments for up to 1-11/16" fasteners. For high torque applications requiring minimal depth of hole, splines burrow deeper as you drive out the fastener in reverse... View Details
List: $25.95
Aggressive spiral flute design burrows itself deeper as it turns counter-clockwise, increasing its grip on the fastener as it removes. Tailored for fasteners that are below the work surface, also works on fasteners above or flush with the work surface. For use with hand tools. View Details
List: $63.95
Hex head multi-spline extractors for broken off, difficult to remove studs, bolts, fittings and socket screws and more. Includes the most common sizes from 1/8" to 13/32" drill hole in 1/32" increments for up to 3/4" fasteners. For high torque applications requiring minimal depth of hole where the fastener is above, slightly below or flush with the work surface... View Details
List: $52.95
Six lobed spiral bits are designed to remove rounded or stripped fasteners with internal drive heads. 10 sizes of extractors fit TORX® and TORX Plus® sizes T-10 to T-55; internal hex sizes 7/64" to 1/2" and 3mm to 10mm. Will also work on other stripped or rounded internal drive screw heads... View Details
List: $5.75
Spiral, left hand thread grips tighter as you turn. Chrome vanadium steel. Remove damaged screws and bolts... View Details
List: $19.00
Four double-edged cutting/gripping edges = 8 points of contact. Non-slip engagement removes even the toughest frozen bolts. Tip has built-in center punch with no additional tool required... View Details
List: $129.95
For screws of diameters 1/4" to 1/2" inclusive. Alloy steel construction. Set includes: drill bits numbers 1 - 5 and drill guides numbers 921 - 1821. View Details
List: $6.75
Spiral, left hand thread grips tighter as you turn. Chrome vanadium steel. Remove damaged screws and bolts... View Details
List: $5.75
Spiral, left hand thread grips tighter as you turn. Chrome vanadium steel. Remove damaged screws and bolts... View Details
List: $19.00
Four double-edged cutting/gripping edges = 8 points of contact. Non-slip engagement removes even the toughest frozen bolts. Tip has built-in center punch with no additional tool required... View Details
List: $20.95
Four double-edged cutting/gripping edges = 8 points of contact. Non-slip engagement removes even the toughest frozen bolts. Tip has built-in center punch with no additional tool required... View Details
List: $27.25
Set includes sizes 1 through 5. Spiral, left hand thread grips tighter as you turn. Chrome vanadium steel... View Details
List: $6.75
Spiral, left hand thread grips tighter as you turn. Chrome vanadium steel. Remove damaged screws and bolts... View Details
List: $48.50
Four double-edged cutting/gripping edges = 8 points of contact. Non-slip engagement removes even the toughest frozen bolts. Tip has built-in center punch with no additional tool required... View Details
List: $20.00
Four double-edged cutting/gripping edges = 8 points of contact. Non-slip engagement removes even the toughest frozen bolts. Tip has built-in center punch with no additional tool required... View Details
List: $26.95
Four double-edged cutting/gripping edges = 8 points of contact. Non-slip engagement removes even the toughest frozen bolts. Tip has built-in center punch with no additional tool required... View Details
List: $86.95
Four double-edged cutting/gripping edges = 8 points of contact. Non-slip engagement removes even the toughest frozen bolts. Tip has built-in center punch with no additional tool required... View Details
