AUTOMATIC SLACK ADJUSTER RELEASE TOOL AND WRENCH

Part No. AE4651M

$72.00

Features & Benefits

Used for adjusting automatic slack adjusters
Fork-end tool to release the tensioner button and a 5/16" double square offset reversible wrench with E-Z Grip handle
Release the anti-reverse mechanism without prying

Full Details Below

Features & Benefits

Used for adjusting automatic slack adjusters
Fork-end tool to release the tensioner button and a 5/16" double square offset reversible wrench with E-Z Grip handle
Release the anti-reverse mechanism without prying
Apply more turning power with less fatigue to the hand
Wrench for adjusting or changing Rockwell / Arvin Meritor Slack Adjusters on Class 7 and 8 trucks and trailers

Return Policy *

Return for refund within: 30 days
Return for Replacement within: 30 days

* Applies to purchases made on matcotools.com only; see your Matco distributor for warranty or return information on purchases made elsewhere.

AUTOMATIC SLACK ADJUSTER RELEASE TOOL AND WRENCH is rated 4.6 out of 5 by 7.

Rated 5 out of 5 by dollman0 from Great Brake tool for the Professional Some of the guys laugh at me when I get a new specialty tool off the Matco Truck, but this one is awesome! You need to use a blow gun to get the grease out of the ratchet when you are done, it gets gummed up. Otherwise, this tool set makes easy work of adjusting the square drive slack adjusters, the release tool stays in place to free up your hands.

Date published: 2011-12-24

Rated 3 out of 5 by stevenp from does the job but can see many ways to improve It has its specific purpose but it hums up very often requires constant cleaning. if it was made into a sealed unit with a flex head locking tool it would be perfected. but overall good tool and get the job done.

Date published: 2014-12-18

Rated 5 out of 5 by Prybar9821 from Easy to use Tools are easy to identify, which makes for a seemless adjustment on the slack adjuster. You don't have to fumble with a screwdriver and box end wrench. The fork pawl tool holds in place which makes life a little easier.

Date published: 2011-11-15

Rated 5 out of 5 by Craig from Great idea Nice and easy operation. Ratchet could use a upgrade. I have had a few replaced over the years because of the ratchet skipping. You have to keep the grear cleaned, should be sealed to keep the grease out.

Date published: 2011-12-04

Rated 5 out of 5 by cpost562 from Makes my job much easier The tool is great for the slack adjusters with the 5/16 square adjuster and is much easier than using a screw driver to open the release pin

Date published: 2011-09-13

Rated 4 out of 5 by thunder87m from A must have Great tool for the purpose. Price is high for a tool that only has one use and rarely gets uesd.

Date published: 2011-09-13

Rated 5 out of 5 by Craig from Can't buy anywhere else! Matco is the only place I have seen this tool! Great slack adjuster tool.

Date published: 2011-11-17