HYPER-STEP COBALT MECHANIC'S LENGTH REDUCED SHANK DRILL BIT SET, 29 PIECE

Part No. DBC29HSRM

$539.95

Features & Benefits

Matco Exclusive Patented Cobalt Hyper-Step Drill Bit Set uses the strongest material for you to drill through the toughest jobs like stainless, grade 8 fasteners, hardened alloys and cast irons
Mechanic’s size which is around 75% the length of traditional drill bits for increased drill bit rigidity and improved tight space access which cuts 45% faster and stay sharp 4X longer than traditional bits
Each drill bit acts like a step drill, spreading the job of cutting across multiple levels, keeping the drill bit cool, the wear down and eliminating the need for pilot holes

Full Details Below

Features & Benefits

Matco Exclusive Patented Cobalt Hyper-Step Drill Bit Set uses the strongest material for you to drill through the toughest jobs like stainless, grade 8 fasteners, hardened alloys and cast irons
Mechanic’s size which is around 75% the length of traditional drill bits for increased drill bit rigidity and improved tight space access which cuts 45% faster and stay sharp 4X longer than traditional bits
Each drill bit acts like a step drill, spreading the job of cutting across multiple levels, keeping the drill bit cool, the wear down and eliminating the need for pilot holes
Three-flatted shanks on both sizes below 3/8" and on the 3/8" reduced shank sizes up to 1/2"
Contains 1/16" through 1/2" by 64ths cobalt mechanic’s length Hyper-Step drill bits

Return Policy *

30-Day Risk FREE return for refund or replacement
If you are not 100% satisfied with your returnable items, return the product for a refund.

* Applies to all purchases made on MatcoTools.com excluding Toolboxes, Tool Carts, Diagnostics, Welders, Shop Equipment and shipped items weighing more than 150 pounds; Excludes all Gifts and Branded Apparel items except branded apparel size exchanges for exact items. See your Authorized Matco Tools distributor for warranty or return information on purchases made offline.

Specifications

Left Handed	No	Color (Matco Standard)	Orange
3/8" Reduced Shank Size	Yes	Weight	3.0lbs.
Length	8-1/4"	Packed In	Indexed Case
Used for (Drill Bit)	Stainless Steel, Sheet Metal, Point Angle, Plastic, Mild Steel, High Alloy Steel, Copper, Cast Iron, Brass, Aluminum	Tip Geometry	Hyper Step
Self Centering	Yes

Individual Items of Set

5/32" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS10

3/32" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS6

19/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS19

17/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS17

11/32" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS22

1/16" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS4

23/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS23

3/8" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS24

1/8" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS8

7/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS7

9/32" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS18

5/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS5

31/64" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS31

1/2" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS32

15/32" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS30

1/4" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS16

9/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS9

5/16" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS20

21/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS21

15/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS15

7/32" COBALT HYPER-STEP MEACHNIC'S LENGTH DRILL BIT

DBCHS14

13/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS13

3/16" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS12

7/16" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS28

25/64" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS25

27/64" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS27

13/32" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS26

11/64" COBALT HYPER-STEP MECHANIC'S LENGTH DRILL BIT

DBCHS11

29/64" COBALT HYPER-STEP REDUCED SHANK MECHANIC'S LENGTH DRILL BIT

DBCHS29

29 PIECE COBALT MECHANIC'S LENGTH HYPER-STEP REDUCED SHANK DRILL BIT SET is rated 4.8 out of 5 by 82.

Rated 5 out of 5 by BCallaway03 from Beat drill bits ever You can’t beat these bits. They cut right through metal. The only down fall is I don’t know how to sharpen them.

Date published: 2022-01-19

Rated 3 out of 5 by Heavyquip from Good drill bit but over priced. This have been decent drill bits for medium duty items. I have drilled holes in trailers but not anything I would consider thick for the bits. When I purchased them I was told they carried a lifetime warranty. I attempted to warranty one and was told they only carry a 30 day warranty. For the cost of the bits I have been disappointed with the quality. If you are doing light to medium duty work they are ok but not for continous work loads. I would recomend a little more research for the work you will be doing to see if they are adequate.

Date published: 2021-08-10

Rated 5 out of 5 by Onaroll from Light years ahead of other drill bits 2000 Porsche 996 convertible in the shop with cam covers leaking - factory exhaust has to come off. 6 broken studs later I starting drilling them out. 2 hours of work and one stud is halfway drilled out. Matco Hyperstep bits cut the time to 30 mins per stud. 3/16 bit to drill a hole in the middle of the stud, follow by a 17/64 and then clean the threads - you are done. Still dislike drilling steel studs out of aluminum heads but the hyperstep bits make it as easy as you can get. Worth the price and has my highest recommendation. Happiest tool purchase in a while! Wish they weren’t built in China though - come on Matco bring the manufacture of these to the states.

Date published: 2021-09-06

Rated 3 out of 5 by rolllydampolly from perfect for sheet metal and thin material not so much for thick steel the set i have is this standard set i wish i had gotten the cobalt bits these are very brittle over all im pretty happy its great for starting a hole in a broken bolt to put your heavy duty bits on

Date published: 2021-12-28

Rated 5 out of 5 by Dirty309 from You won't believe it You won't believe how incredibly efficient these bits are until you see it in person. Video reviews might not mean much to some since you're not there holding the drill, but they are the real deal. I run these bits in an M18 drill and they chew into broken studs and bolts with mind bending speed. Think of the last time you went to the restaurant you said you'd never go to again because of what happened last time. Well you went there again and now you're hitting your front door like a linebacker to get to the bathroom. That is how these bits go through metal.

Date published: 2020-11-23

Rated 1 out of 5 by Matt78 from They couldn’t drill through hot butter I bought this set thinking it would be the last set I would have to buy. These bits failed me time and time again, one instance being they could drill through an ABS bolt that snapped off, another being this week when it couldn’t drill through a wheel stud and dewalt bits had to save the day. These things couldn’t drill though hot butter! For $500 these things should be able to drill through anything...

Date published: 2021-12-20

Rated 5 out of 5 by Eddierm3 from love these still bits I initially bought the smaller set before this one. Once I used those I decided to get these. I've used HSS, titanium, and other cobalt bits before for many years but these are by far the fastest cutting. I had to drill through 1/4 inch 3/8 inch thick steel and my regular cobalt bits we're taking a long time. I got these and it drilled through in a tenth of the time. I'll never go back to my other bits when drilling through metal. Also use some good cutting/tapping oil when you use them.

Date published: 2021-10-08

Rated 4 out of 5 by Joe1124 from Good at first, but dull like other bits. These bits will work faster and better than any other drill bit on the market. However, like most drill bits they dull after a few uses. Which is where the warranty really helps out.

Date published: 2021-11-22

29 PIECE COBALT MECHANIC'S LENGTH HYPER-STEP REDUCED SHANK DRILL BIT SET Reviews - page 2