Takes accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
Withstands hazardous 8,000V spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
True-RMS AC voltage and current for accurate measurements on non-linear signals
Takes accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
Withstands hazardous 8,000V spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
True-RMS AC voltage and current for accurate measurements on non-linear signals
Relative mode removes test lead resistance from low ohm measurements
Built-in thermometer to take temperature readings without having to carry a separate instrument
Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
Selectable filter for accurate voltage and frequency measurements on motor drives
Min/Max-Average recording with Min/Max Alert to capture variations automatically
CAT III 1000V, CAT IV 600V safety rated
Peak Min/Max allows capture of intermittents as fast 250 µS
Return Policy *
Return for refund within: Non-Refundable
Return for Replacement within: 30 days
* Applies to purchases made on matcotools.com only; see your Matco distributor for warranty or return information on purchases made elsewhere.
Specifications
Capacitance
10,000
Counts
20000
Backlight
Yes
Cat III (Volts)
1000
Cat IV (Volts)
600
Continuity/Diode Test
Yes
Frequency (kHz)
200
Removable Remote Display
No
Resistance (MW)
50
Temperature Reading High (C)
55
Temperature Reading Low (C)
-20
True RMS
Yes
Auto-Ranging
Yes
Voltage AC/DC (High)
1000
Temperature Reading High (F)
-40
Temperature Reading Low (F)
500
Current AC/DC (High)
10
DIGITAL MULTIMETER SERIES 5 is rated
5.0 out of
5 by
1.
Rated 5 out of
5 by
busjockey from
A great meterThis meter is awesome! Gives you great ghost voltage response and the zero volt response is lightning quick, soon as you put the leads together, bam!, zero volts. Great for when you are checking for system volts at a connector. When it gives you zero volts at the connector you are testing, you know you have a short circuit. The high resolution mode is also great for checking resistance on low ohm components. And the continuity fucntion is lightining quick too. Great for finding intermittent short circuits. I use the loadpro dynamic test leads with this meter, and they work great together. A very solid meter. Just save your money and buy this one. Also, the dc accuracy is great too, .05%, great for voltage drop testing.
