Get the job done easier with a unique non-slip design that protects and works on 6-point, TORX® and 70% rounded off nuts and fasteners
Enhanced 6-point contact design with socket teeth that grip the flat sides of the fastener to drive a nut that is 70% rounded off
Easier identification with high-visibility laser and impression stamped size markings
Specially heat-treated to provide continuous impact use
Includes sizes: 5mm, 5.5mm, 6mm-15mm
Return Policy *
30-Day Risk FREE return for refund or replacement
If you are not 100% satisfied with your returnable items,
return the product for a refund.
* Applies to all purchases made on
MatcoTools.com excluding Toolboxes, Tool Carts, Diagnostics,
Welders, Shop Equipment and shipped items weighing more than
150 pounds; Excludes all Gifts and Branded Apparel items
except branded apparel size exchanges for exact items. See
your Authorized Matco Tools distributor for warranty or return
information on purchases made offline.
Specifications
Drive Size
1/4"
Magnetic
No
Measurement Scale (Metric/SAE/Torx)
Metric
Socket Length Type
Deep
Number of Points
Anvil
Socket Type
Impact
Individual Items of Set
1/4" DRIVE 7MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA7M
1/4" DRIVE 6MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA6M
1/4" DRIVE 5.5MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA5.5M
1/4" DRIVE 5MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA5M
1/4" DRIVE 8MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA8M
1/4" DRIVE 15MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA15M
1/4" DRIVE 14MM METRIC DEEP PRO-NON-SLIP IMPACT SOCKET
ADPA14M
1/4" DRIVE 13MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA13M
1/4" DRIVE 12MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA12M
1/4" DRIVE 11MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA11M
1/4" DRIVE 10MM METRIC DEEP PRO NON-SLIP IMPACT SOCKET
ADPA10M
1/4" DRIVE 9MM METRIC DEEP PRO-NON SLIP IMPACT SOCKET
ADPA9M
1/4" DRIVE 12 PIECE METRIC DEEP PRO NON-SLIP IMPACT SOCKET SET is rated
5.0 out of
5 by
2.
Rated 5 out of
5 by
ASM154 from
Some of the best sockets on the planet, periodThese are nothing short of amazing. The non slip design WORKS!!!! And they can flat out replace the following:
- chrome 6 and 12 point (they are thin)
- impact 6 and 12 point (they are impact rated
- e torx
- spline
- tap sockets
- extractor sockets (up to 70% rounded)
And they hold up extremely well. By design they grip like almost nothing else yet they redirect the force to the flats like almost nothing else. This results in minimal wear to them and an insanely good grip on the socket.
All that being said, they grip so well, you’ll be using a pin punch to knock out some fasteners from their clutches. Getting off all those different fasteners with one socket is easily a worthwhile trade for that!!!
I don’t know how everybody isn’t talking about these!
Date published: 2021-12-08
Rated 5 out of
5 by
Elcabro from
You’d swear it was magic.After being convinced with the 3/8 Pro-nonslip sockets it was a no brained to add in the 1/4 set. These have proven time and time again that they are worth their weight in gold. I don’t even use a normal 6 or 12 point anymore, knowing that these will take whatever I throw at it out I have not only streamlined my tool cart set up but my productivity has increased since I’m not hunting for easy outs or bolt extractors.
