For bolts and screws 1/4" (6mm) to 1/2" (12mm) thread diameter
Mechanic's length Nitro-Tip drill bits for an easier start on the hole
Bearing steel extractors and hex drive rings for increase torque and durability
For broken and exposed or recessed bolts and screws
Includes 9 drill guides and 5 spine screw extractors and hex drive rings
Return Policy *
30-Day Risk FREE return for refund or replacement
If you are not 100% satisfied with your returnable items,
return the product for a refund.
* Applies to all purchases made on
MatcoTools.com excluding Toolboxes, Tool Carts, Diagnostics,
Welders, Shop Equipment and shipped items weighing more than
150 pounds; Excludes all Gifts and Branded Apparel items
except branded apparel size exchanges for exact items. See
your Authorized Matco Tools distributor for warranty or return
information on purchases made offline.
Specifications
Removes Screw Stud/Bolt Size
1/2", 1/4"
Extractor Type
Multi-Spline Screw
Overall Length
7
Minimum Depth of Hole
3/8"
Weight
1.5lbs.
Packed In
Blow Molded Case
Finish
Black Oxide
Individual Items of Set
1/4" MECHANICS LENGTH NITRO-TIP DRILL BIT
DB14NTML
SE100A CASE
SE100ABOX
5/16" MECHANICS LENGTH NITRO-TIP DRILL BIT
DB516NTML
11/32" MECHANICS LENGTH NITRO-TIP DRILL BIT
DB1132NTML
3/16" MECHANICS LENGTH NITRO-TIP DRILL BIT
DB316NTML
1/8" MECHANICS LENGTH NITRO-TIP DRILL BIT
DB18NTML
#3 EXTRACTOR W/ TURN NUT
SE100A-3E
17/32 O.D. DRILL GUIDE
SE100A-1721
15/32 O.D. DRILL GUIDE
SE100A-1521
1/2 O.D. DRILL GUIDE
SE100A-1621
7/16 O.D. DRILL GUIDE
SE100A-1421
3/8 O.D. DRILL GUIDE
SE100A-1221
5/16 O.D. DRILL GUIDE
SE100A-1021
11/32 O.D. DRILL GUIDE
SE100A-1121
13/32 O.D. DRILL GUIDE
SE100A-1321
9/16 O.D. DRILL GUIDE
SE100A-1821
#2 EXTRACTOR W/ TURN NUT
SE100A-2E
#5 EXTRACTOR W/ TURN NUT
SE100A-5E
9/32 O.D. DRILL GUIDE
SE100A-921
#4 EXTRACTOR W/ TURN NUT
SE100A-4E
#1 EXTRACTOR W/ TURN NUT
SE100A-1E
Parts Breakdown
SE100A_PartsBreakdown_01.pdf
25 PIECE SCREW EXTRACTOR SET is rated
3.0 out of
5 by
2.
Rated 5 out of
5 by
Anonymous from
They work (most of the time)If the bolt is too far recessed obviously this isn't the tool for it. But the drill bits help to drill the center, as long as you leave enough meet on them the poles and nuts do seem to turn em out pretty good
Date published: 2022-03-10
Rated 1 out of
5 by
Warren59 from
WorthlessLoved the idea in concept. The centering pieces don't even work for my applications as I can never get them to line up over the broken bolt. I still have to center punch and hope for the best. Once I'm drilled, using the appropriate size extractor, they just strip out inside the bolt. I've yet to have one actually grab and remove the bolt. I've followed up with the fluted (old standard style) extractors and pulled the bolts. I did have one bite enough to break though with very little effort. Don't recommend and won't buy again.
