• FREE SHIPPING OVER $75*

Pullers

SPICER U-JOINT PUSH-PULLER | Matco Tools List: $340.95
(0) SPICER U-JOINT PUSH-PULLER
MST7490

Removes frozen, stubborn U-joints with the help of a 1/2" impact wrench. Compact size can be used at different angles enabling the technician to remove the U-joint no matter how limited the access may be. Works on most Dana Spicer and Meritor U-joints except Spicer's Life series model SPL250X. View Details

SLACK ADJUSTER PULLER | Matco Tools List: $284.95
(0) SLACK ADJUSTER PULLER
MST5055

Unique, durable design will remove frozen corroded slack adjusters from the S-cam found on HD vehicle brakes. Will not damage components. View Details

SMALL PULLER CROSS BLOCK | Matco Tools List: $36.95
(0) SMALL PULLER CROSS BLOCK
4534A-2

Part of MST4534A. View Details

SMALL ADJUSTING YOKE | Matco Tools List: $35.95
(0) SMALL ADJUSTING YOKE
4534A-6

Part of MST4534A. View Details

FRONT HUB REMOVER ASSEMBLY | Matco Tools List: $60.95
(0) FRONT HUB REMOVER ASSEMBLY
4579A-2

Part of MST4579A. Designed to simplify front hub removal and installation for wheel bearing, CV joint and trans-axle service. The universal design fits most front wheel drive cars. View Details

1-1/4" COLLET/PIN ASSEMBLY | Matco Tools List: $78.95
(0) 1-1/4" COLLET/PIN ASSEMBLY
4581A-1

Part of MST4581A. Double thread forcing screw. View Details

SLIDE HAMMER ASSEMBLY | Matco Tools List: $45.95
(0) SLIDE HAMMER ASSEMBLY
4581A-5

Part of MST4581AM. SHANK. ROLLING STRAIGHT THREADED PIN. View Details

HEAVY-DUTY U-JOINT PULLER | Matco Tools List: $303.95
(1) HEAVY-DUTY U-JOINT PULLER
MST5190B

Provides the strength to disassemble even the toughest U-joints in minutes on virtually all Class 7 and 8 trucks and machinery. For use with up to 1" impact tool or air tool. Will not damage the driveshaft, bearings, yokes or bearing cups... View Details

PITMAN ARM PULLER | Matco Tools List: $135.95
(1) PITMAN ARM PULLER
MSTPA643

Replaceable forged jaws are adjustable to fit the toughest jobs. Two clamp bolts lock the jaws on the Pitman arm giving the technician a solid grip. Services cars and light trucks up to 3/4-ton and can perform other pulling jobs. View Details

SMALL UNIVERSAL 2 AND 3 JAW PULLER SET WITH NARROW QUICK ADJUSTING JAWS | Matco Tools List: $599.95
(0) SMALL UNIVERSAL 2 AND 3 JAW PULLER SET WITH NARROW QUICK ADJUSTING JAWS
KS20301193S

Made in Germany. 4-in-1 set. For automotive use... View Details

SHEPPARD PITMAN ARM REMOVER | Matco Tools List: $409.95
(0) SHEPPARD PITMAN ARM REMOVER
MST149

Applications include M80, M90, M100, 292, 392, 492 and 592 gear. Used on Chevrolet, GMC, Freightliner, Kenworth, Mack, Navistar, Paccar, Peterbilt, Volvo and many others. Fits short sector shaft and long sector shafts with a bolt or nut attachment... View Details

2 TON INDEXING GEAR PULLER | Matco Tools List: $121.95
(0) 2 TON INDEXING GEAR PULLER
MST2T

Jaws are made of CR-MO with a chrome finish. Center screw is made of carbon steel with a black oxide finish - 4.75" in length. Leg's indexing-jaw design allows legs to index into position and stay in place, allowing you to support the puller and quickly connect each jaw one at a time to the pulley without help... View Details

UNIVERSAL WIPER ARM PULLER | Matco Tools List: $190.95
(0) UNIVERSAL WIPER ARM PULLER
WAP1421

For pulling tight-fitting, rusted and deep-set windshield wiper arms on VW, Audi and many European/American cars. Windshield wiper arms can be pulled without removing the hood of the vehicle. The threaded spindles are guided by a movable bushing, which allows the puller to be fitted to the edge of the arm at the start and in the middle of the removal process... View Details

DODGE HEMI HARMONIC DAMPER PULLEY PULLER | Matco Tools List: $272.95
(0) DODGE HEMI HARMONIC DAMPER PULLEY PULLER
MST1345A

Removes the harmonic damper pulley on many Dodge 5.7L Hemi Pickups from 2009 to Current and 1995-2009 3.5L V6 Engines. Includes 6 different length push rods & special Patent Pending tip. Spring loaded legs retain leg position and give greater ease and control when installing the puller in confined areas... View Details

BLIND HOLE BEARING PULLER SET | Matco Tools List: $241.95
(0) BLIND HOLE BEARING PULLER SET
MST4581A

For pulling jobs requiring an internal pull, i.e., pilot bearings. Set includes: 4 collets to fit a variety of applications: 3/8" - 1/2", 9/16" - 11/16", 5/8" - 1", 1" - 1-1/4"; 2-1/2 lbs. slide hammer and T-handle. Packaged in a blow molded storage case. View Details

LONG FORCING SCREW | Matco Tools List: $19.95
(0) LONG FORCING SCREW
4534A-3

Part of MST4534A. View Details

DETENT PIN | Matco Tools List: $13.95
(0) DETENT PIN
4534A-7

Part of MST4534A. View Details

WASHER AND BOLT SET | Matco Tools List: $13.95
(0) WASHER AND BOLT SET
4534A-11

Part of MST4534A. View Details

1" COLLET/PIN ASSEMBLY | Matco Tools List: $52.95
(0) 1" COLLET/PIN ASSEMBLY
4581A-2

Part of MST4581A. Double thread forcing screw. View Details

SPREADER FOR WHEEL BEARING HOUSING AND STEERING PARTS | Matco Tools List: $128.95
(0) SPREADER FOR WHEEL BEARING HOUSING AND STEERING PARTS
WBHP142

Made in Germany. For the safe and completely risk-free spreading of shock absorber mountings, wheel bearing housing and steering parts. Work safely with the Kukko 145-2. No need for chisels, screwdrivers or wedges. This tools does it all... View Details