• FREE SHIPPING OVER $75*

Cylinder Head Tools

1/2" DRIVE #9 RIBE HEAD BOLT SOCKET | Matco Tools List: $37.25
(0) 1/2" DRIVE #9 RIBE HEAD BOLT SOCKET
MCTXR9

The #9 RIBE is designed to drive #10 & #9 RIBE head bolts. The dual functionality allows technicians to service VW stock and aftermarket head bolts. Fully turned shaft allows for access in the tightest of spots. Removes and installs #9 and #10 RIBE fasteners... View Details

EXHAUST MANIFOLD REPAIR PROKIT FORD 4.6L, 5.4L, AND 6.8L GAS (ROCKY) | Matco Tools List: $449.95
(0) EXHAUST MANIFOLD REPAIR PROKIT FORD 4.6L, 5.4L, AND 6.8L GAS (ROCKY)
PMXR200APRO

Cut repair time from 4-5 hours per engine side to less than 90 minutes. Simply bolt the template in place and drill dead center and perfectly perpendicular to the stud, without removing the cylinder head. Eliminate risk of drilling into the coolant jackets of the cylinder head... View Details

VW/AUDI CYLINDER HEAD BOLT SOCKET | Matco Tools List: $78.95
(1) VW/AUDI CYLINDER HEAD BOLT SOCKET
HZ25799

Polydrive cylinder head bolts are a unique fastener used on VW and Audi only. 1/2" drive, bit length 130mm, overall length 168mm. All cylinder head bolts are being replaced with these new bolts. View Details

CELICA HEAD BOLT SOCKET DRIVER REPLACEMENT BIT | Matco Tools List: $8.75
(0) CELICA HEAD BOLT SOCKET DRIVER REPLACEMENT BIT
CXY10M2B

For double hex rather than triple squares. Ribs are 60 degree "included angle" rather than the ZXN standard on European cars. Bits do not fit in European applications and European bits do not fin in Japanese applications... View Details

TERCEL HEAD BOLT SOCKET DRIVER | Matco Tools List: $50.40
(0) TERCEL HEAD BOLT SOCKET DRIVER
CXY8M2

For double hex rather than triple squares. Ribs are a 60 degree "included angle" rather than the ZXN standard on European cars. Bits do not fit in European applications and the European bits do not fit in Japanese applications... View Details

1/2" DRIVE 12MM METRIC TRIPLE SQUARE HEAD BOLT SOCKET | Matco Tools List: $43.75
(0) 1/2" DRIVE 12MM METRIC TRIPLE SQUARE HEAD BOLT SOCKET
MCXZN12M

Fully turned shaft allows for access in the tightest of spots. Removes and installs triple square fasteners. Blast finish increases tools grip on fastener... View Details

3/8" DRIVE 5/16" SAE 12 POINT THIN WALL SOCKET | Matco Tools List: $21.40
(0) 3/8" DRIVE 5/16" SAE 12 POINT THIN WALL SOCKET
BD102T

A special purpose deep 12 point, 3/8" drive socket works on outboard motor connecting rod bolts. Overall length 1-3/4". View Details

1/2" DRIVE 10MM METRIC TRIPLE SQUARE HEAD BOLT SOCKET | Matco Tools List: $41.60
(0) 1/2" DRIVE 10MM METRIC TRIPLE SQUARE HEAD BOLT SOCKET
MCXZN10M

Fully turned shaft allows for access in deep recess areas. Removes and installs triple square fasteners. Blast finish increases tools grip on fastener... View Details

3/8" DRIVE 14MM METRIC 12 POINT HEAD BOLT SOCKET | Matco Tools List: $52.90
(0) 3/8" DRIVE 14MM METRIC 12 POINT HEAD BOLT SOCKET
BXP142M

For head removal for Toyota motor engines. View Details

PUSH ROD REMOVER | Matco Tools List: $26.95
(1) PUSH ROD REMOVER
PR483

Quickly removes push rods so you can replace the intake gasket. No need to loosen and retighten the rocker arm. The tool pivots the rocker arm to compress the valve spring and free the push rod for removal... View Details

1/2" DRIVE T55 HEAD BOLT SOCKET | Matco Tools List: $49.20
(0) 1/2" DRIVE T55 HEAD BOLT SOCKET
MCTXT55

Fully turned shaft allows for access in the tightest of spots. Removes and installs triple square fasteners. Blast finish increases tools grip on fastener... View Details