Tools

The vise design fits in tight spots; tool is 3-5/8" long and opens to 2-1/8". The vise is often left in place with the clamp compressed during service. Ramp on jaws guides tab of clamp into correct position and traps it in the slot for safety... View Details

The vise is often left in place with the clamp compressed during service. Ramp on jaws guides tab of clamp into correct position and traps it in the slot for safety. Tighten knurled knob by hand or use 1/4" drive ratchet... View Details

Innovative angled design with a cushioning effect, which prevents damage to hoses while applying pressure, making it the ideal set for under hood work. Designed to pinch hoses shut so you can repair engine, brakes and fuel systems without the need to drain fluids. Non-conductive and lightweight. View Details

Seals steel lines once disconnected and installs in seconds. Prevents fluid leaks and contamination during service and is usable with all automotive fluids. For three different sizes of hose; 1/2", 3/8" and 5/16"... View Details

Pliers designed with self-locking feature that holds after pressure is applied; simply pull handles apart to release pressure. Used to seal vacuum hoses, fuel lines and radiator hoses plus other flexible materials. Patent pending offset design allows more access in hard to reach areas... View Details

Provides extra long reach, 17" overall length . Cross cut tip design grips almost any hose clamps from multiple directions . Ratcheting jaws hold the clamp in the open position, freeing up your hands and making the job easier and faster . View Details

Allows a quick disassembly of two button connectors, mainly used for fuel systems, gearbox, brake fluid, power steering, air system and A/C systems . Works on DEF connectors . Increased jaw opening... View Details

Universal radiator petcock socket used to open and close petcocks. 2-slot design permits use on all petcock types. Use with 1/4" drive ratchet or 7/8" wrench... View Details

The 90 degree Hose Pinching Pliers (7") features a new angled design with a cushioning effectg. Unlike traditional straight pinching pliers the innoative angled design prevents damage to hoses while applying pressure making it the ideal tool for underhook work. Designed to pinch hoses shut so you can repair engines, brakes, and fuel systems without the need to drain fluids... View Details

1/4" drive set. Steel universal socket fits radiators, engine blocks, storage tanks, etc. with an O-ring to hold a 7/8" wrench in place. Molded plastic socket fits narrow wing plastic drain fittings, both plug and flow-through types. View Details

New memory-flex cable stays in the desired shape while in use. Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16" - 2-1/2" (18mm - 54mm). Precision clamp on end of flexible cable allows for extended reach where other models cannot reach... View Details

Makes removing and installing CLIC-R® clamps easy. One side of the pliers loosens clamps for removal, flip over to tighten and install. Allows clamps to be reused... View Details

Provides an extra long reach and 35° angled tips for hard-to-reach hoses. Cross-cut tip design grips most hose clamps from multiple angles . Ratcheting lock mechanism holds the clamp in an open position for hands-free use ... View Details

Tip is designed to fit between hose and fitting to safely break stuck hoses loose. For removing radiator hoses, heater hoses, transmission lines and virtually any stubborn rubber hose stuck to a fitting. Precisely machined and trimmed... View Details

Removes 5/32" to 1/2" vacuum and fuel line hoses. One jaw grasps hose; the other jaw pushes off the line. View Details

Seals flexible brake, fuel and vacuum lines; heater and radiator hoses. Smooth rounded edges to insure no damage to the internal hose reinforcements. Locking feature allows hands free use... View Details

Handy four pack. Seals flexible brake lines, fuel and vacuum lines. Smooth rounded edges ensure no damage to the internal hose reinforcement... View Details

Special-machined head adapters fit most freeze plugs: 3/4", 1", 1-1/4", 1-1/2" and 1-3/4". High-carbon steel, fully-plated. Two formed shafts: 8" straight and 18" angled with knurled ring nut. View Details

Works to easily depress release clips for simple hose removal. Tool is angled and offset to allow extra leverage for tough disconnects. View Details

Use to seal steel lines once disconnected. Prevents fluid leaks and contamination during service. Can be used with all automotive fluids. View Details