Showing 1 - 6 of 6
Features & Benefits
- Combines a digital insulation tester with a full-featured, true RMS digital multimeter
- Live circuit detection prevents insulation test if voltage greater than 30V is detected for added user protection
- PI/DAR timed ratio tests with TrendIt™ graphs identifies moisture and contaminated insulation problems faster
- Memory storage through Fluke Connect eliminates writing down results which reduces errors and saves data for historical tracking over time
- Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
- Historical tracking and trending of assets identifies degradation over time and allows real-time decisions to be made in the field with Fluke Connect® Assets (sold separately)
- CAT III 1,000V, CAT IV 600V rated
Features & Benefits
- Reads up to 600V and 600A in both AC and DC modes
- Features proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- Large, easy-to-read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Create and share reports from the field via email or converse in real time with ShareLive™ video calls
- Connect your meter to your smartphone using Fluke Connect Measurements app to increase the troubleshooting power of your clamp
- True-RMS voltage and current for accurate measurements on non-linear signals
- CAT IV 600V, CAT III 1,000V rated
Features & Benefits
- 200 A AC and DC current measurement with detachable jaw
- 600 VAC and DC voltage measurement
- Detachable jaw makes accessing wires and viewing the display easier
- Built-in flashlight/torch allows for easy illumination and identification of wires
- CAT III 600V
- Compact design fits in your hand and can be used while wearing protective equipment
- State of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Large, easy to read back-light display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
- Soft carrying case
- 3 year warranty
Features & Benefits
- Checks resistance, continuity, frequency, capacitance and diode test
- Measures 20A (30 seconds momentary, 10A continuous) and provides accurate measurements on non-linear loads
- Temperature range: -10º to 50ºC
- CAT III 600V safety rating
Features & Benefits
- Meter only
- Tests DC and AC voltage, resistance, current, conductance, duty cycle, frequency and pulse width to test virtually any circuit
- Flight recorder function records, captures and stores intermittent readings on oxygen sensors and current drain
- Access door for fast battery changes without opening up the case
- Input Alert provides audible warning against wrong use of input jacks
- Analog bargraph to track changing or unstable signals
- Large display digits and two-level bright white backlight for increased visibility
- Autohold™ to capture stable readings with only one touch of the leads
- Current measurements up to 10 A, 20 A for up to 30 seconds
- Millisecond pulse width measurements for fuel injectors
- Min/Max/Average recording with Min/Max Alert to capture variations automatically
- Peak Min/Max to record transients as fast as 250 μs
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Replacement fuses: 0P943121, 0P803293
Features & Benefits
- Takes accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Withstands hazardous 8,000V spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- True-RMS AC voltage and current for accurate measurements on non-linear signals
- Relative mode removes test lead resistance from low ohm measurements
- Built-in thermometer to take temperature readings without having to carry a separate instrument
- Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
- Selectable filter for accurate voltage and frequency measurements on motor drives
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- CAT III 1000V, CAT IV 600V safety rated
- Peak Min/Max allows capture of intermittents as fast 250 µS