Back Probe Pins

Matco Gold Screw-on Alligator Clip Set. View Details

Sharp, small diameter probes slide along wire into connector to back probe circuit. No need to break apart connectors to get an electrical reading. Alligator clips allow easy connection to multimeter probes. View Details

Sharp, small diameter probes slide along wire into connector to back probe circuit. No need to break apart connectors to get an electrical reading. Includes: (10) straight pins, (5) 90° pins and (5) 45° pins. View Details

Specifically designed with a variety of back probes to access different electrical circuits from the rear of the connector to prevent piercing wires and possibly damaging the circuit. No need to disconnect the connector and terminal . Kit includes: (2) 90 Back Probes, (2) 45 Back Probes, (2) Straight Back Probes (2) Spoon Back Probes, (2) Extended Lead Back Probes, (2) Jumper Back Probes. View Details

Insulation - Nylon 6, fire retardant, UL94 V-O rated. Probe Tip - Brass and nickel plated. View Details

Probes feature flexible stainless steel pins for access between automotive wire insulation and weather pack seals. Compatible with all test leads with standard 4mm shrouded banana plugs. View Details

Includes an assortment of back probe pins with standard banana plug connections. Alligator clips offer many ways to connect to multimeter probes and provide a better way to connect, reducing the chance of a bad reading. Probes are fully insulated to provide added protection... View Details

Sharp, small diameter probes slide along wire into connector to back probe circuit. No need to break apart connectors to get an electrical reading. Bent at 90º with longer, more durable pins. View Details

2" long pins pass between the weather pack seal and wire. Sharp point ensures good contact to the electrical connector, and the pin's insulation protects it from shorting to other wires. Slides onto test probes measuring 2mm. View Details

Flexible and formable 1-1/4" pin provides an easy connection past weather pack seals to connector conductors. Banana jack accepts all meters and banana jack leads. View Details

Quickly tests for back pressure and identifies clogged or obstructed catalytic converters. Three stage adapter (18mm-12mm) for accessing O2 sensor ports or (standard 1/4"-20) self tap access anywhere. Adapter flange for common Toyota style O2 sensors... View Details

Small 6.5" piercing probe is designed for self centering wire piercing on 28 - 20 gauge wire. Large 7.5" piercing probe is designed for self centering wire piercing on 18 - 8 gauge wire. Self centering... View Details

Flexible silicone probe bends for hard-to-reach areas, great for harness connectors and sensor wiring. Probes are fully insulated which provide added protection and come with standard 4mm female banana plug connections. For use up to 30 volts. View Details

Specifically designed to access electrical circuits from the rear of the connector to prevent piercing wires and possibly damaging the circuit. No need to disconnect the connector and terminal. Kit includes 4 Spoon Back Probes: (2) red, (2) black. View Details

Includes an assortment of back probe pins with standard banana plug connections. Alligator clips provide a better way to connect to multimeter probes, reducing the chance of a bad reading. Probes are fully insulated which provides added protection... View Details

Adapter allows access to hard to reach test points into flexible weather sealed connectors. Snaps on to Pomona meter probes with .080" tips. IEC 1010 rated. View Details

Sharp, small diameter probes slide along wire into connector to back probe circuit. No need to break apart connectors to get an electrical reading. Kit includes: (4) 90°, (4) 45°, (5) straight, (4) extended and (2) in-line back probe assemblies. View Details

Allows access to back probe harness connectors, fuel injectors and automotive sensors. Straight, 45° and 90° stainless steel probes in .027" and .040" diameters for versatility. Color coded for easy identification... View Details