Showing 1 - 13 of 13
Features & Benefits
- DC voltmeter indicators provide active feedback
- Bad ground indicator
- Relay and component Tester
- DDM is CAT-IV hybrid safe
- Digital volt and ohmmeter for circuit testing
- Measures frequency for sensor testing
- Included K-Type temp probe allows for temperature readings
Features & Benefits
- AC / DC 750V capability
- CAT III 1000V/CAT IV 600V
- Dual display for ACV measuring with Frequency
- 2K Ohms Resistance range
- 1K Hz Frequency Counter
- Integrated single pole test for phase detection
- 2,000 count digital display
- IP65 for outdoor use
Features & Benefits
- EASY TO USE. Cordless circuit tester for DC circuits with voltages between 3 and 28 volts
- NO GROUND CABLE REQUIRED. Simply use a free hand to contact and act as a ground
- SIMPLE IDENTIFICATION. Illuminates and sounds when voltage is detected
- SAFE TO USE. Use on ECM's, computers sensors and airbags without issue
- V-TIP DESIGN. Easily pierce insulation, circuit tester will beep and vibrate when touching positive voltage
- Simple alkaline battery powered
Features & Benefits
- Digital circuit tester checks 6, 12, 24 and 48V systems
- Digital display to read the accurate voltage value
- LCD indicator for easy power (red) and ground (green) identification
- Stainless steel testing probe
- Includes a spring cable which is able to extend to 12' for maximum reach
- CE Approved
Features & Benefits
- Versatile tester with internal power source that allows for use with live and non-live 6V, 12V, and 24V DC systems
- Easy detection with patented edge-lighting that allows the entire handle and logo to illuminate red when power is detected and green when grounded
- Uses 16340 type lithium battery
Features & Benefits
- It is suitable for testing electrical D.C. circuit on vehicles within the voltage range of 6-24V only
- Tester with needle point probe for easy back probing and piercing
- Comes with screw in alligator clip for additional versatility
Features & Benefits
- Tests standard automotive electrical DC 6-24V circuits
- When black ground clip is clamped to a suitable earth point and contact tip is placed onto testing sample, test bulb will glow if current is present
- Designed with a heavy-duty, stainless steel probe and insulated shaft
- Clip with positive soldered connection on a 12" coiled cord
- Replacement bulb: N016D
Features & Benefits
- Can be used with most 12V mini jump starters with the standard EC5 port
- Allows for more portability and freedom from long battery wires
- Factory correct terminals means less of a need to back probe
- Isolates component from the rest of the circuit which results in less damage to entire wiring/computer modules
- No need to remove component for bench test
Features & Benefits
- Replacement bulb for circuit testers
Features & Benefits
- Checks high and low voltages on 6V-12V and 24V circuits
- Connect the red lead to a power source and the black lead to a ground source
- Tester will light up red for power and green for ground during testing
- Heavy-duty, stainless steel probe with insulated shaft
- 12" coiled cord
Features & Benefits
- Tests standard automotive electrical DC 12-42V circuits
- Safe for low current circuits and hybrid vehicles
- Automatic voltage identification featuring blue for under 40V and red for over 40V
- 12" coiled cord
Features & Benefits
- Insulated probe with shrink tubing prevents shorting the side of the probe to other components
- Features incandescent bulb (part # HW27460)
Features & Benefits
- PREMIUM QUALITY. Quickly check car headlights, taillights, turn signals, faulty sockets, connections, fuses, broken wires and more
- VOLT RANGE. Heavy-duty circuit tester tests standard automotive electrical DC 6 and 12V circuits
- HEAVY-DUTY. Features a heavy-duty battery clip that is tough enough to stand up to frequent use
- ACCESSIBLE. Includes a 5' tough but flexible heavily insulated rubber wire to withstand rugged use