Showing 1 - 7 of 7
Features & Benefits
- Performs running, residual, rail and flow rate pressure tests
- Professional dual scale gauge reads 0-100psi and 0-700kPa with relief valve and fuel discharge hose and protective rubber boot
- Includes adapters, hoses and fittings to test fuel injection systems plus two popular adapters for import vehicles, as well as the GM TBI adapter
- New threaded style dual-manifold T-bar for threading directly onto gauge hose
- Common thread sizes: M12 x 1.5, M12 x 1.25, M8 x 1.0, Ford specific (1/8-27), GM TBI specific (M16 x 1.5)
Features & Benefits
- Comprehensive compression testing set for most gasoline engine applications including import, domestic, motorcycles, marine and small engines
- Master set contains a high quality gauge (0-300psi (0-2000 kPa)) with rubber boot, long 25" flex hose with quick release fittings, pressure relief valve, (4) 12" long hoses in 10mm, 12mm and 14mm plus adapters
- Adapters provided are for use on both tapered and flat seat plugs. Set also includes long steel, deep well steel adapters in 14mm and 16mm for deep recessed plugs found in some engines like in the Ford Triton
Features & Benefits
- Kit includes 14mm/18mm hose and 10mm, 12mm and 14mm deep adapters
- High quality 0-300psi Matco gauge with pressure relief valve and quick coupler
- Includes spare parts kit and pouch for convenient storage
Features & Benefits
- Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet
- Air is applied through one adapter to show the presence of leaks within the system
- Six pairs of stepped adapters to fit most turbo systems on cars and light trucks
- Smoke adapter allows the ability to introduce smoke to the turbo tester, providing a second visual test
- Can also be used on some cooling system hoses
- Includes pressure gauge, shut off valve and pressure regulator
- Adapters range from 31mm to 90mm
Features & Benefits
- Quickly tests for back pressure and identifies clogged or obstructed catalytic converters
- Three stage adapter (18mm-12mm) for accessing O2 sensor ports or (standard 1/4"-20) self tap access anywhere
- Adapter flange for common Toyota style O2 sensors
- Removable 6" high temperature silicon tube for easy adapter installation
- 0-15PSI gauge with 2 1/2" face
Features & Benefits
- This basic fuel injection tester includes large and small Schrader adapters, M6-1.00 O-ring adapter, and tee manifold
- Includes everything necessary to test the following systems: American Motors; Bosch AFC, MPC European and Japanese (except CIS- use FIT447); Chrysler Corporation; Ford Motor Company; GM (except TBI- use FIT446)
- Also includes everything necessary to test other systems using Bendix-type fuel injection or a Schrader-type valve, including the small Schrader valve found on TBI and multi-port fuel injection systems on Ford products
- The 2-1/2" gauge has a dual scale dial with ranges from 0-100 psi and 0-7 kg/cm2
Features & Benefits
- Quick connects for Chrysler, GM and other vehicles with metal and plastic disconnects
- Includes right angle adapters for Ford, GM, etc.; and deadhead pressure check adapter