Tool Catalog
View Print Tool and Tool Storage Catalog
List: $119.95
Spring-loaded tension and serrated edges provide a firm grip on most types of fasteners. Special jaw design allows tool to rotate back and reposition, performing better than other crowfoot wrenches specially in tight spaces. With just three wrenches you can replace all metric and standard wrenches between 5 – 32mm and 3/16" – 1-1/4"... View Details
List: $303.40
Matco's exclusive twin angle design of the box and open ends allows for improved access with the additional surface angle on each end. Better alignment with fasteners thanks to a 0° offset. Non-slip open end design that easily loosens and tightens fasteners rounded up to 70%... View Details
List: $412.15
Loosen or tighten any 6pt, 12pt, spline, TORX, square and even up to 50% rounded off fasteners. 90 tooth head ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 4° swing arc. Stop corner round off and remove fasteners up to 40% faster with an exclusive, non-slip open end that works in both directions without reversing the wrench... View Details
List: $179.05
72 tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc. Reversing lever with 12° offset provides on the fly ratcheting adjustability with knuckle clearance. Non-slip box end... View Details
List: $271.90
72 tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc. Reversing lever with 12° offset provides on the fly ratcheting adjustability with knuckle clearance. Non-slip box end... View Details
List: $194.20
Hot-forged steel jaws are specialty heat-treated for needed strength in removing or holding fasteners. Laser etched scale for fasteners measurement. Set includes: 6", 8", 10", 12". View Details
List: $278.20
Permits access in tight spots when obstacles don't permit direct access to a fastener. Includes sizes: 7/16" x 1/2", 9/16" x 5/8", 5/8" x 3/4", 11/16" x 13/16", 7/8" x 15/16". View Details
List: $592.15
0° offset box end and flex ratcheting end on extra long beam. Loosen or tighten any 6 point, 12 point, spline, TORX, square and even up to 50% rounded off fasteners. 72 tooth flexible head ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc... View Details
List: $199.95
Access tight spaces with 75° offset. Made of hardened alloy chrome vanadium steel with a mirror chrome finish. Set includes: 1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 7/8", 13/16" x 15/16". View Details
List: $312.40
With a 15° knuckle offset, Matco’s wrenches keep you from busting your knuckles. Stop corner round off and remove fasteners up to 40% faster with an exclusive, non-slip open end that works in both directions without reversing the wrench. Forged from higher carbon steel and the same heat treating process used in manufacturing jet landing gear... View Details
List: $183.20
The 15° offset ends allow for a strong grip on fasteners when working in difficult working areas. The standard long design not only provides greater access, but it also is sized for optimum comfort and balance. Made of hardened alloy chrome vanadium steel with a mirror chrome finish... View Details
List: $166.90
Multipurpose design removes regular screw heads and rounded off screw heads. Designed for versatile use, removes 70% rounded off screw heads with the open end and box end. Removes 90% rounded off screw heads with the box end... View Details
List: $415.75
72 tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc. Extra long beam length helps reach where standard wrenches will not. Non-slip box end... View Details
List: $173.80
With a 15° knuckle offset, Matco’s wrenches keep you from busting your knuckles. Stop corner round off and remove fasteners up to 40% faster with an exclusive, non-slip open end that works in both directions without reversing the wrench. Forged from higher carbon steel and the same heat treating process used in manufacturing jet landing gear... View Details
List: $289.00
Super thin design for those limited access work areas. Precisely machined to be strong and durable. Made of hardened chromium-vanadium alloy steel with mirror chrome finish... View Details
List: $256.15
72 tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc. Non-slip box end. Includes sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4". View Details
List: $269.95
Reversible jaw allows for work on nuts and pipes. Extra capacity for working on nuts and pipes with bigger diameters. Extra induction hardening on saw-toothed jaw for a perfect grip... View Details
List: $215.20
Multipurpose design removes regular screw heads and rounded off screw heads. Designed for versatile use, removes 70% rounded off screw heads with the open end and box end. Removes 90% rounded off screw heads with the box end... View Details
List: $161.65
The 15° offset ends allow for a strong grip on fasteners when working in difficult working areas. The standard long design not only provides greater access, but it also is sized for optimum comfort and balance. Made of hardened alloy chrome vanadium steel with a mirror chrome finish... View Details
List: $260.35
With a 15° Knuckle Offset, Matco’s wrenches keep you from busting your knuckles. Stop corner round off and remove fasteners up to 40% faster with an exclusive, non-slip open end that works in both directions without reversing the wrench. Forged from higher carbon steel and the same heat treating process used in manufacturing jet landing gear... View Details