Showing 1 - 11 of 11
New
Features & Benefits
- Clear funnel allows a quick visual check of the coolant from across the shop.
- Comes with a lid to keep contaminants out as well as store the caps and adapters
- Eliminates trapped air pockets which usually cause erratic cooling system and heater performance
- t controls the proper amount of coolant entering system and enables unattended filling of the cooling system
- The funnel eliminates squeaky belts caused by coolant overflow and protects the environment
- Five different colored radiator adapters and six caps to fit most cars, pickups, trucks and many farm tractors
- Two straight extensions and two 45° elbows for angled and hard-to-reach applications
- Includes New Cap for 2022 and newer Toyota Tundra and Sequoias with 3.5L V6 Turbo
Features & Benefits
- DURABLE CONSTRUCTION. Crafted from high-density polyethylene, ensuring strength and durability
- CHEMICAL AND SOLVENT RESISTANT. Specifically designed to withstand a range of chemicals and solvents, making it ideal for capturing antifreeze
- FAST POURING DESIGN. Features a large spout that allows for quick and efficient pouring, helping to minimize spills and mess during fluid disposal
- ANTI-SPLASH LIP. Equipped with a built-in anti-splash lip to prevent spills and splashes
- For use with Antifreeze
Features & Benefits
- When service and repairs are performed on EV Vehicles it is critical that all air be bled from the system. Failure to do so may result in expensive damage to battery packs and electrical components
- The EVCOOL71850 is the ultimate tool for bleeding EV Cooling Systems
- Operates on shop air
- Vacuum Generator, gauge and control valves all mounted centrally on top of unit for user friendly operation
- Vacuum gauge to monitor evacuation of air from the system, leak test and refill
- Large 2 gallon coolant container
- Attaches to system using custom adaptors with quick connect fittings (EVCOOLADP530 ADAPTORS SOLD SEPARATELY)
- Locking air trigger
- Fluid control valve
Features & Benefits
- Ideal for evacuating or topping off DEF reservoirs
- Simple manual syringe-type action extracts or dispenses DEF quickly
- Integrated valve and cap to prevent spills and leaks
- Dual seal piston
- Easy disassembly for cleaning
Features & Benefits
- Cooling system Pressure Tester, Coolant Retainer and Coolant Refiller all in one
- You can change a cooling system component on a vehicle, check your repair by pressure testing and add coolant or refill the cooling system just by turning valves
- No parts to lose and no buttons to hold
- Requires cooling system adapters and shop air to function
- Tool creates pressure to pressure test a cooling system
- Alternately, by turning a valve a vacuum can be created to refill a cooling system with coolant
- Tool can also create sufficient vacuum flow to retain the coolant in the cooling system while changing a component (like a freeze plug or temperature sensor) such that draining the coolant is not necessary
Features & Benefits
- Replacement lower connect vacuum gauge for MCR100, MCR101, MCR102A, MCR102U, MCR103A, MCR103U and MCR303T
- Internal shock resistance
- Reads 0 to 30" of Mercury
Features & Benefits
- Utilizes deep vacuum technology to eliminate airlocks during cooling system refilling
- Eliminates the need for system bleeding
- Universal attachment to most radiator and header tanks
- Small and large rubber cones to suit both passenger and commercial vehicles; no additional adapters needed
- Eliminates coolant spills and waste
- Integrated vacuum gauge automatically tests cooling system for leaks
- Integrated filling tap and vacuum check valve removes the need for interchanging hoses
- Quick release air supply locking trigger for easy use
Features & Benefits
- HIGHER CAPACITY VACUUM GENERATOR (6.0 CFM). Creates a deep vacuum (28.3 inHg) quickly to complete the job in less time
- AUTOMATIC SHUT-OFF VALVE. Automatic shut-off valve makes for easier use and better ergonomics
- INCREASED DIAMETER HOSE. Larger diameter refill hose and screen - approximately 10' long
- REDUCED TIME. Cut a 20 minute task down to only 6 minutes
- ADAPTER GUIDEBOOK INCLUDED. Comes with a cooling system adapter selection guidebook
- ELIMINATES AIRLOCKS. Eliminates airlocks during cooling system refilling
- COMPACT DESIGN. No need to change hoses during refilling process
- SHOP AIR OPERATION. Operates with shop air, minimum 90psi required
- LARGER PASSAGEWAYS. Increased diameter fluid passageways for a faster, more complete fill.
- High Flow refil rate 3.9 gallons a min
- MATCO EXCLUSIVE DESIGN. Exclusive venturi design exclusive to Matco Tools
Features & Benefits
- Eliminates airlocks during cooling system refilling
- Compact design - no need to change hoses during refilling process
- Complete refilling process can be done in 2-3 minutes
- Perfect for the customer who has cooling system adapters
- Operates with shop air, minimum 90psi required
- Comes with a cooling system adapter selection guidebook
- All metal construction: anodized, chrome plated or stainless steel for a lasting finish
- Seals directly onto the radiator or with standard type adapters
Features & Benefits
- Eliminates airlocks during cooling system refilling
- Compact design - no need to change hoses during refilling process
- Complete refilling process can be done in 2-3 minutes
- Perfect for the customer who does NOT have cooling system adapters
- Seals to cooling system filler neck via specially molded rubber cones - Cones fit well on more than 99% of automobiles and light trucks in the field
- Operates with shop air, minimum 90psi required
- All metal construction: anodized, chrome plated or stainless steel for a lasting finish