Showing 1 - 11 of 11
Features & Benefits
- EXPERT PITMAN ARM REMOVAL. Efficiently and safely removes large pitman arms on 3/4- to 1-ton 250-350 series pickup trucks including F450/F550 models with ZF steering gear
- PATENTED DESIGN. Uses leverage action and requires less torque and space compared to other pitman arm tools and removal methods
- COMPREHENSIVE. Accommodates pitman arms that are 3" wide
- RUGGED DESIGN. Forged alloy steel construction securely locks the tool in place
- CONVENIENT. Requires less clearance and eliminates the need to remove the steering box on most trucks
Features & Benefits
- Quickly grip studs (pull pins) and control the dent pulling process
- One-handed operation
- Capture 2.0mm, 2.2 mm and 2.6 mm studs as close as 3/8" apart
- Steck straight edge aligns the stud with the non-damaged metal area for accurate pulls
- Minimizes metal work and reduces the need for slide hammers
Features & Benefits
- 3-1/2" x 1" vice jaw
- Allows quick access to grip and pull multiple pull pins/studs
- Grips vertical and horizontal flanges
- Wide knurled flat jaw won't cut pins or flanges
- Two large pulling rings to accommodate up to 1-ton light pulling
Features & Benefits
- 17" long
- Replaceable self-tapping screw
- Replacement parts
- FU11200-PK5 - SELF TAPPING SCREW 5PK
Features & Benefits
- 2 curvatures (one on each side) fit most cars
- Hooks above the lip of the wheel opening to pull rear quarter panels and wheel wells easier than clamps or jacks
- Design allows pulling without bulging
- Eliminates tearing on thin sheet metal
Features & Benefits
- Pull rods eliminate the replacement of headliners, upholstery, inner panels, etc.
- Pull rods to repair quarter-sections, doors, tops, cowls, lids, etc.
- Includes: 4 pull rods (formed shank), 2 pick pulls (straight shank) and stainless steel straight edge
Features & Benefits
- Progressively removes dents resulting in a flat repair surface
- For multiple stud pulling on hard-hit areas such as rockers, rails and areas near posts
Features & Benefits
- For welded studs from 1.9 to 2.8mm
- Pull small dents and dings
Last Chance
Features & Benefits
- Collision force to one front fender often travels through the hood to push out the top of the opposite fender
- Rolls the fender top back into shape in just minutes
Features & Benefits
- Smaller size used for tail light openings, radiator supports, pillars and in fast set-up work
- Fits openings too small for the Quarter Puller QP22
Features & Benefits
- For bolt type hinge pullers with a 2-ton capacity
- Put a twist in your pull to straighten damaged door posts
- V-shaped gusset allows three strategic pull positions