• FREE SHIPPING OVER $150*

Diesel Engine

GM DURAMAX FLYWHEEL LOCK | Matco Tools List: $41.95
(1) GM DURAMAX FLYWHEEL LOCK
MST6925

Designed to hold the flywheel stationary when removing or replacing the crankshaft bolt. Saves time by not removing the starter motor. Holds the engine in place for high torque requirements... View Details

TOYOTA HEAVY DUTY 64MM END CAP WRENCH | Matco Tools List: $65.95
(0) TOYOTA HEAVY DUTY 64MM END CAP WRENCH
TOYOFS

Provides multiple contact points that engage the housing cap securely, allowing easy removal on all Toyota and Lexus cartridge oil filters. 3/8" square drive with a 1" hex on the top. Made of forged and machined steel with a bright chrome plated finish. View Details

SWIVEL GRIP OIL FILTER WRENCH FOR CATERPILLAR ENGINES | Matco Tools List: $27.50
(0) SWIVEL GRIP OIL FILTER WRENCH FOR CATERPILLAR ENGINES
OF70

Tough, stainless steel band with permanently bonded textured coating for superior gripping power that won't slip. Works on Caterpillar engines and has a range of 5-1/4" to 5-3/4". "Swivel Grip" handle makes it easy to turn in tight spots... View Details

DAVCO FILTER WRENCH | Matco Tools List: $54.95
(0) DAVCO FILTER WRENCH
MST6914

Fits Davco Diesel filter models 232, 233, and 234 and opens the vent cap also. Stainless steel construction. Caterpillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines... View Details

BMW INJECTOR PULLER | Matco Tools List: $117.95
(0) BMW INJECTOR PULLER
MST1180

Makes removal of injectors on 8 and 6 cylinder faster and easier. Quicker than using the factory tool that needs to be worked down and around the injector. On the 8 cylinder V-8 4.4 liter turbo (N63), the tool will pay for itself on the first job. View Details

WATER SENSOR WRENCH FOR DURAMAX 2001 AND NEWER | Matco Tools List: $12.95
(0) WATER SENSOR WRENCH FOR DURAMAX 2001 AND NEWER
WSW12

Removes and installs the water sensor on 2001 and newer 6.6L GM Duramax Diesel engines. Use when replacing the fuel filter or when servicing the water. View Details

WATER SENSOR WRENCH FOR DURAMAX 2012 AND NEWER | Matco Tools List: $12.95
(0) WATER SENSOR WRENCH FOR DURAMAX 2012 AND NEWER
WSW14

Removes and installs the water sensor on 2012 and newer 6.6L Duramax diesel engines. Use when replacing the fuel filter or servicing the water sensor. Plastic sensor has a new hex design that could be damaged by tools, like pliers, that do not specifically fit the sensor... View Details

1/2" FUEL LINE DISCONNECT FOR VOSS | Matco Tools List: $54.95
(0) 1/2" FUEL LINE DISCONNECT FOR VOSS
FLD1327

Two piece design allows easy access to Voss style connectors. Straight and 90° version to select depending on location of connector. Made from precision laser cut steel for long long life. View Details

3-5/8" - 6" LARGE SLIP JOINT OIL FILTER PLIERS | Matco Tools List: $71.95
(0) 3-5/8" - 6" LARGE SLIP JOINT OIL FILTER PLIERS
OF5095

Fits most truck and tractor oil filters including Case, Caterpillar, Cummins, Detroit, John Deere, Mack and others. Two-position, slip joint handle enables wide range with sure grip teeth to prevent slipping. View Details

FUEL FILTER WRENCH - FORD TRANSIT | Matco Tools List: $36.95
(1) FUEL FILTER WRENCH - FORD TRANSIT
FFWFT

Wrench is used to remove and install fuel filter elements on 3.2L diesel Ford transit engines. Works on 2015 to current 150, 250 and 350 models. Notched to match the canister design to help eliminate slipping and damage to the canister... View Details

DIESEL BRUSH | Matco Tools List: $20.95
(0) DIESEL BRUSH
NH1

Stainless steel brush with a 1.175 inch major diameter. Ideal for removing rust, carbon deposits and dirt. Designed for injector cleaning, copper cleaning, seat cleaning, injector cup and plunger bore applications. View Details

FORD 6.7L DIESEL INJECTOR SOCKETS | Matco Tools List: $89.95
(0) FORD 6.7L DIESEL INJECTOR SOCKETS
MST1140

17mm 12 point flare nut socket and deep crows foot gives you the ability to remove various injector lines. Injectors can be removed without breaking and damaging the electrical connections. Long socket has the clearance required and linear shape to properly torque the fuel lines... View Details

DIESEL FILTER WRENCH FOR PACCAR | Matco Tools List: $31.00
(0) DIESEL FILTER WRENCH FOR PACCAR
DFWPAC

For use on Paccar's new frame, mounted primary fuel filters on 2010 and later Kenworth and Peterbilt trucks. Half-moon design allows easier access to the fuel filter. Laser cut steel material provides strength to loosen even the toughest threaded bowls. View Details

DURAMAX INJECTOR TUBE REMOVER/INSTALLER | Matco Tools List: $247.95
(0) DURAMAX INJECTOR TUBE REMOVER/INSTALLER
OTC7222

Removes injector tubes for service and re-installs. Fits GM 6.6L Duramax diesel 2001 to present. View Details

FUEL LINE DISCONNECT FOR CUMMINS | Matco Tools List: $54.95
(0) FUEL LINE DISCONNECT FOR CUMMINS
FLD1326

Two piece design allows easy access for Cummins fuel lines. Straight and 90° forks allow access to wide range of connectors found on the motor. Made from precision laser cut 1/4" steel. View Details

DURAMAX WATER IN FUEL SENSOR WRENCH | Matco Tools List: $39.95
(0) DURAMAX WATER IN FUEL SENSOR WRENCH
MST1310

Two tools in one: one end is designed to fit the odd shaped 40mm 12 sided sensor found on 2001 to 2010 trucks; the other end fits the 42mm 6 sided sensor on 2011 to current trucks. Used every time a fuel filter is replaced due to the plastic sensor that can easily be damaged by using pliers and other nonspecific designed tools. View Details

CUMMINS ISX 4 WEDGE TIMING SET | Matco Tools List: $449.95
(0) CUMMINS ISX 4 WEDGE TIMING SET
CM3021

Comparable to factory Cummins #3163021. Set includes 4°, 6° (x2) and 7° wedges and crank pin. Extra 6° wedge is included for (2007-2012) engines with two camshafts... View Details

27MM FUEL RAIL PRESSURE SENSOR WRENCH FOR DURAMAX ENGINES | Matco Tools List: $102.95
(0) 27MM FUEL RAIL PRESSURE SENSOR WRENCH FOR DURAMAX ENGINES
MST1215

Removes fuel rail pressure sensor on 2006 to 2010 Duramax LBZ and LMM diesel engines. Saves more than 1 hour depending on engine/vehicle model. Reduces the amount of components that need to be removed to service the sensor... View Details

DAVCO DIESEL FILTER WRENCH | Matco Tools List: $66.95
(0) DAVCO DIESEL FILTER WRENCH
MST6915

Fits Davco Diesel filter models 382/384 and also opens the vent cap. Durable stainless steel construction is laser cut to ensure the proper grip. View Details

SWIVEL GRIP OIL FILTER WRENCH FOR CUMMINS AND DETROIT DIESEL ENGINES | Matco Tools List: $26.50
(0) SWIVEL GRIP OIL FILTER WRENCH FOR CUMMINS AND DETROIT DIESEL ENGINES
OF50

Tough, stainless steel band with permanently bonded textured coating for superior gripping power that won't slip. Works on Cummins and Detroit Diesel engines with a range of 4-5/16" to 4-3/4". "Swivel Grip" handle makes it easy to turn in tight spots... View Details