Showing 1 - 24 of 26
Features & Benefits
- TORQUE OIL CANISTERS. Used when torquing plastic and aluminum oil canisters after preforming an oil change
- TURNS BREAKER BAR INTO A TORQUE WRENCH. Turns a normal 3/8-inch drive ratchet or breaker bar into a torque wrench
- PREVENTS OVER TORQUING. 3/8-inch drive (Female) to 3/8-inch drive (Male) adapter prevents over torquing by completely releasing, even with continued turning
- ADAPTABLE. 21mm socket or wrench can also be used to operate the tool
- Kit includes a 25, 35, and 40Nm adapters
- Not for use with impact or pneumatic wrenches
Features & Benefits
- Helps Prevent Over Tightening Plastic and Aluminum Oil Filter Canisters and Filters
- Turns any 3/8" drive ratchet or breaker bar into a 25 Newton-meter torque wrench
- Can also be used with 21mm socket or wrench
- Not for use with impact or pneumatic wrenches
Features & Benefits
- EASY REMOVAL. This versatile tool magnetically attaches to oil and fluid drain plugs so you can remove them without dropping
- NO MORE DROPS. Magnetic end holds onto the drain plug bolt once loosened and provides the final unthreading while retaining the bolt from dropping into fluids
- EASY ACCESS. The 11.5" long shaft can be used in virtually any location and held at just about any position and still thread or unthread the plug as desired
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
New
Features & Benefits
- Part of the RDPW100A
Features & Benefits
- Rounded and polished steel tip slides the self-locking part of the rubber gasket into the locking channel
- The shape of the steel tip is designed without sharp edges that could cut the gasket and features the proper shape needed to perform the job
- Ergonomic, dual-durometer handle provides the necessary leverage needed
Features & Benefits
- Use with Audi/VW/Mercedes-Benz models with cartridge style engine oil filter
- Use to remove, install and re-torque oil filter housing during filter replacement
- Manufactured from heavy-duty chrome vanadium to withstand loads required to remove tight oil filter covers
- 74mm across flat
- 1/2" square drive and 24mm hex
- 14 flutes
Features & Benefits
- Use for most Honda/Acura models with spin-on type engine oil filter
- Use to remove, install and re-torque oil filter housing during filter replacement
- Manufactured from heavy-duty chrome vanadium to withstand loads required to remove tight oil filter covers
- 64mm across flat
- 3/8" square drive
Features & Benefits
- Use for BMW models with cartridge style engine oil filter
- Use to remove, install and re-torque oil filter housing during filter replacement
- Manufactured from heavy-duty chrome vanadium to withstand loads required to remove tight oil filter covers
- 86mm across flat
- 1/2" square drive and 24mm hex
Features & Benefits
- Set contains tools and bits to remove plastic oil pan drain plugs
- Plastic oil pans found on many late model Ford, Volkswagen, Audi and BMW
- Special adapters will not damage drain plugs; traditional tools can cause damage and lost time
Features & Benefits
- Includes tools and inserts for repair of stripped drain plugs without leakage
- Use original plug instead of replacement
- Kit designed to repair aluminum oil pans with damaged drain plug threads size M12x1.75 commonly found in GM, Ford and Mazda
- Inserts included allow for the original drain plug to be used instead of aftermarket plug at a different size
- Works with drain plugs commonly found in but not limited to: GM, Ford and Mazda aluminum oil pans
- General Motors vehicles 1999-2004 CK Engine ASM v8/LR4/4. 8v, Lm7/5.3T, Lq4/6.0U
- REPAIRS: General Motors vehicles 2003-2005 ST1 Engine ASM-4.3L v6/ LU3/4.3x
- Kit contains drill counter bore tap driver guide 5-12mm length inserts
Features & Benefits
- Provides a clean manner to drain oil filter
- Works on many VW 2.0 vehicles: Golf V2.0T 2.5, Golf V (all) 2.0T, Jetta V (all) 2.0T, Passat B6 (all) 2.0T
Features & Benefits
- Used to remove and replace the Injector Pressure Regulator (IPR) on Ford 6.0L and other diesel engines
- Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused
- Use with 3/8" square drive ratchet
Features & Benefits
- Replacement magnetic drain plugs for use with Oil Pan Rethreading Kit (PR588)
- Replaces worn and stripped oil pan drain plugs
Features & Benefits
- May be used on the vehicle as room permits
- Removes damaged thread and taps a new oversized thread
- Set includes a piloted drill, spring loaded tapping tool and five magnetic drain plugs
- Unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leaking
- Works on soft steel and aluminum oil pans with 1/2", 12mm and 14mm threads
- Torqued at 25 ft/lbs.